Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Chevy to 1955-1959 Chevy Pickup Motor Mounts

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Steel
Sold in Quantity:
Kit
Finish:
Painted
Min. Mounting Distance:
18.00
Max. Mounting Distance:
26.00
Hole Diameter:
.56
Hardware Included:
Yes
Material Thickness:
.19
Mounting Plate Length:
5.25
Mounting Plate Width:
4.00
Garage Sale:
No
Notes
One kit will do both sides of the engine. Will not work properly on a Chevy picking using a Mustang II front suspension.
Chevy to 1955-1959 Chevy Pickup Motor Mounts
Chevy to 1955-1959 Chevy Pickup Motor Mounts
Chevy to 1955-1959 Chevy Pickup Motor Mounts

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

Chevy V8s into 1955-1959 Chevy pickup & panel trucks. Plates bolt in.

One mount kit has enough brackets, cushions, bolts and hardware to do both sides of the engine.

1955-1959 Chevy Motor Mount Installation Instructions (pdf)

Application

This kit is universal in nature and can be modified to use in many applications besides Chevy pick-ups.

Specs


Customer Reviews

Rated 4.9 out of 5 by 7 reviewers.
RATING BREAKDOWN
7 reviews
5 Stars
6
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Timbo
Verified Purchaser
Yuma, Az
Product Rating

Great Product

August 28, 2010
Very sturdy and straight forward. Replaced the old front mounts with little effort.
Pros:
  • Sturdy and durable
  • Simple to Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Partsman
Gainesville, GA
Product Rating

Quality product

March 05, 2010
I used these to put a BBC in a 49 Ford car. I modified them to fit my unique combination. These are rugged parts.
Pros:
  • Easy To Use
  • Looks good
  • Easy motor changes
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

The Professor
Verified Purchaser
Iowa
Product Rating

Don't screw around with lesser mounts

March 10, 2012
As advertised and not only that, the support for it was perfect with answers you can understand. I had two slight problems with the installation but that is expected with a universal product like this. I needed to install a bolt differently because of clearance issues and needed to beef up two washers. Other than that, it went fine. Simple to use and the price was right. Don't screw around with mounts you find on the Internet. Speedway might cost a little more, but they are perfect and if you are a beginner, the tech support (thanks Tom) is excellent as well.
Pros:
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Slick
Verified Purchaser
SA, TX
Product Rating

Great Product

February 24, 2012
I love these. They allow for choices in engine placement and make pulling engine in and out very easy. Also, unlike the cross member style mounts,these mounts keep the pathway under the engine and oil pan clear and empty. Easy removal of oil pan necessary. I built my first Apache using these, and now I am using them to replace the tubular cross member style mount a previous owner used on my current Apache.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ARM
Verified Purchaser
Christiansburg VA
Product Rating

Did what it was made for.

January 05, 2012
came well packed
Pros:
  • Durable
  • Lightweight
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

gsnort
Verified Purchaser
Waupun, WI
Product Rating

Great motor mounts

April 12, 2015
I'm using these mounts for a difficult setup in a 1939 Dodge 2-door sedan. The price is fair and these mounts are built stronger than the proverbial brick outhouse. I highly recommend them.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

STRUTZ
Verified Purchaser
ERIN TN.
Product Rating

EXCLENT FIT

May 09, 2015
USED IN 1959 GMC TRUCK FIT PERFECT,GREAT QUALITY
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
7204771

Product Q&A

3 questions : 3 answers

1 answers

does the stock 1955 chevy pick up frame need to be boxed to use these mounts?

cray
westfield,wi
February 22, 2014

does the stock 1955 chevy pick up frame need to be boxed to use these mounts?

Answers

February 24, 2014
EricM
No this kit does not require boxing the frame. The mount plate will bolt inside the channeled frame.
1 answers

I have a 22-1/2" wide,in between frame rails, 2" x 3' tube chassis that I am installing a small block 350 Chevy. Would you feel that these mounts would fit with my application?

Tom
Ballwin,MO
February 19, 2011

I have a 22-1/2" wide,in between frame rails, 2" x 3' tube chassis that I am installing a small block 350 Chevy. Would you feel that these mounts would fit with my application?

Answers

February 23, 2011
Waymon
This kit is universal in nature and can be modified to use in many applications. Eye to eye spacing on this cushion kit is 26" when installed. It can be modified and narrowed to an 18" width minimum.
1 answers

will this application of motor mounts fit/ work on a inline six cylnder

freds51
riverside ca, 92506
May 09, 2015

will this application of motor mounts fit/ work on a inline six cylnder

Answers

May 12, 2015
John
Expert
This mount kit is for the small block V8 and will not work with the inline six. Sorry we do not offer a mount kit for your application.
Page 1 of 1

You may also be interested in:

TH350 Transmission Cushion Mount-Polyurethane
(Part #91025820)
                        

Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

Straight Tubular Transmission Mount
(Part #91628902)
                        

Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

 

Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

Walker Z-514-1 Z-Series 1954 Chevy Pick-Up Radiator
(Part #820Z5141)
                        

We offer Walker Z-Series radiators for 1947-59 Chevy pick-ups with or without air conditioner condenser. They have the top neck centered while the lower is on the right.

1947-1954 use 820-70 fan shroud. 

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

Tubular Transmission Mount with 2 Inch Drop
(Part #91628903)
                        

Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

 

Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.