Chevy Small Block Ignition

Single pole, double throw. On-On configuration. Now a 3-position toggle switch is also available.  These toggle switches take a 1/2" hole to mount them. Plastic housing with steel plate This switch is garage sale priced because it is missing the boot.   NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

Toggle switch works great as a kill switch or with other auxiliary equipment. 25 amp SPST switch with rubber boot and on/off plate.

Ignition system conversion for updating the Flathead V-8. All the best tips and suggestions from the experts, with illustrations.

Mallory Dual Point Ignition Conversion kit w/Electronic Vacuum Switch.  2 - 112 Circuit Breakers 1 - Solid Circuit Breaker Plate 1 - 25010 Heavy Duty Condenser 1 - 25930 Micro-Switch    Clearance!   NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

1932-1941 3-bolt mount electronic Mallory ignitions. 12 volt. Note:  This distributor requires 1.4 ohms of coil resistance.  If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance.  If you are using coil # 447-45001, no resistor will be required.   This distributor is garage sale priced because it is missing the distributor wiring harness.   NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

These MSD Digital SCI Plus ignitions deliver high output Capacitive Discharge (CD) sparks for complete fuel mixture combustion, especially at high rpm. They feature a retard stage to handle nitrous, making sure you don't get detonation from increased cylinder pressure, and a rev limiter that assists with firm launches. The 15 MHz micro-controller is the fastest of all digital ignitions, and gives you a smooth rev limit and precision timing. Easy-to-use rotary dials make adjusting the launch limit and retard amount simple and easy. MSD designed them to install easily ...

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt oil moisture and vibration. Other features include lightweight aluminum housing with cooling fins a present rev-limiter in factory sealed unit per sanction rules Weatherpack® connectors mag trigger input and tachometer input.

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt oil moisture and vibration. Other features include lightweight aluminum housing with cooling fins a present rev-limiter in factory sealed unit per sanction rules Weatherpack® connectors mag trigger input and tachometer input.

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt oil moisture and vibration. Other features include lightweight aluminum housing with cooling fins a present rev-limiter in factory sealed unit per sanction rules Weatherpack® connectors mag trigger input and tachometer input.

This CD Ignition features multiple sparks to improve starting and idle while also having full power output at high rpm. Also has standard MSD type hook ups and is compatible with MSD's coils and distributors. Perfect for budget minded enthusiasts Capacitive Discharge Technology Multiple sparks improve starting and idle Full power output at high rpm Easily connects to points, amplifiers and magnetic pickup distributors Adjustable rev limiter for overrev protection Has the standard MSD type hook-ups and is compatible with MSD's coils and distributors 547-5520 Instructions (Part A) 547-5520 ...

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt, oil moisture and vibration. Other features include, lightweight aluminum housing with cooling fins, a present rev-limiter in factory sealed unit per sanction rules, Weatherpack® connectors, mag trigger input and tachometer input. 

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt, oil moisture and vibration. Other features include, lightweight aluminum housing with cooling fins, a present rev-limiter in factory sealed unit per sanction rules, Weatherpack® connectors, mag trigger input and tachometer input. 

Toggle switch works great as a kill switch or with other auxiliary equipment. 25amp SPST switch with rubber boot and on/off plate.

The Procomp PC6AL is the most powerful ignition of its type available. It is a multi-spark, capacitive discharge, electronic ignition designed for high performance street, drag racing, oval track and marine applications.  The PC6AL uses the latest state of the art digital technology, and when used with the Procomp high performance coil, produces a spark gap current three times greater than most similar systems and almosst eight times the spark of the standard ignition. This unit can be triggered by magnetic, hall effect, points and crank trigger pick ups. Includes ...

Single pole double throw. On-On configuration. Plastic housing with steel plate. Rubber boot protects switch from dirt and moisture. This toggle switch requires a 1/2" hole to mount it.ThreeterminalsTwo toggle positionsRated for 25 amps at 12 volts DC

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt, oil moisture and vibration. Other features include, lightweight aluminum housing with cooling fins, a present rev-limiter in factory sealed unit per sanction rules, Weatherpack® connectors, mag trigger input and tachometer input.

Fully digital design with multi spark CD ignition. Potted with soft urethane so unit is sealed from dirt, oil moisture and vibration. Other features include, lightweight aluminum housing with cooling fins, a present rev-limiter in factory sealed unit per sanction rules, Weatherpack® connectors, mag trigger input and tachometer input.