Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Chevy Flat Tie Rod Steering Arms, Plain

SAME DAY SHIPPING! Order within the next 4 hours 55 minutes and receive same day shipping

Specs
Centerline of Holes:
3.175
Material Type:
Steel
Overall Height:
1.50
Overall Width:
2.625
Overall Length:
9.00
Sold in Quantity:
Pair
Overall Thickness:
.40
Finish:
Zinc
Hole Diameter:
.625
Garage Sale:
No
Notes
Kingpin center to rod end hole is 6". 48" axle width requires a 45.5" c-to-c tie rod assembly.
Chevy Flat Tie Rod Steering Arms, Plain

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

For 1949-54 Chevy passenger car spindles. The arms attach with bolts through the lower 2 backing plate mounting holes (3-1/8" center-to-center) on spindle. The distance between the mounting holes to the center of the tie rod hole is 6 inches.

Note: Chevy arms use a 46" eye to eye tie rod link when used with a 48" wide axle / Chevy spindle. 

Steering Arm Ends Guide (GIF)

Parallel Steering Set-Up Guide (GIF)

Customer Reviews

Rated 4.8 out of 5 by 5 reviewers.
RATING BREAKDOWN
5 reviews
5 Stars
4
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Fred55
Verified Purchaser
Ormond Beach, FL, USA
Product Rating

You get what you pay for.

September 28, 2013
I had purchased some steering arms from a Ebay seller and when I recived them I could not belive that they would sell such junk like that. The holes were not the right size,the edges were not clean cut and the look of the parts I new these were not going on my T BUCKET so I returned them and purchased speed way. Never going back again THANKS speed way. FRED
Pros:
  • Great parts
Cons:
  • there is none
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

F.O.G.
Verified Purchaser
Normal, Ilinois
Product Rating

Flat tie rod steering arms to the rescue

August 13, 2012
Changing an old tube axle with drum brakes to disc. Conversion went great, but found out original steering arms did not fit with the new spindles/rotor. Ordered the flat arms and they bolted right up. Also had to change the tie rod from ball joints to heim joints.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Bad Atitude
Lingle Wy
Product Rating

Good workmanship on arms

July 06, 2010
The bolt holes are 7/16 and I was told they were 1/2 so I needed to find some 7/16 fine thread bolts and nuts not easy in a farm town
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Oldscool
Verified Purchaser
Product Rating

Nice sturdy product.

February 09, 2015
Nice sturdy product. The tabs could be longer though, this won't work with all tube axles.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

crazyman
Verified Purchaser
buffalo n.y.
Product Rating

perfect fit

May 22, 2015
putting a rack in 1951 chevy truck
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
91632026

Product Q&A

1 questions : 1 answers

1 answers

please tell me the bolt hole demensions on this product, thanks.

maine
January 19, 2011

please tell me the bolt hole demensions on this product, thanks.

Answers

January 21, 2011
Jeremy O
These feature 3-1/8"eye-to-eye centers on mount bolt holes.
Page 1 of 1

You may also be interested in:

Chevy Flat Plate Steering Arms, Plain
(Part #91632031)
                        

For cross steering when using 1949-54 Chevy spindles. These flat plate arms have 5/8" holes for spherical rod end use only.

Note:  Uses a 45.5" eye to eye tie rod link when used with a 48" wide axle / Chevy spindle.

Steering Arm Ends Guide (GIF)

Cross Steering Guide (GIF)

Chevy Flat Tie Rod Steering Arms, Chrome
(Part #91632024)
                        For 1949-54 Chevy passenger car spindles. The arms attach with bolts through the lower 2 backing plate mounting holes (3-1/8" center-to-center) on spindle. The distance between the mounting holes to the center of the tie rod hole is 6 inches. 

Note: Chevy arms use a 46" eye to eye tie rod link when used with a 48" wide axle / Chevy spindle. 

Steering Arm Ends Guide (GIF)

Parallel Steering Set-Up Guide (GIF)

Hoop Style Steering Arm, Chevy Spindle
(Part #7204020)
                        

Hoop style steering arm features boss for 7° tapered tie rod end, but can be drilled for 5/8" rod end. Fits 1949-54 Chevy car spindle applications. Measures 6-1/4" from center of hole to spindle mounting surface (where it is cut down for threads).

Steering Arm End Chart (GIF)

Steel Cone Spacers for Rod Ends, 5/8 Inch
(Part #5464110)
                        These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
                    
Bolt Kit for 913-3902
(Part #9133902-2-PLN)