No items in Shopping Cart
Chrome oil pan bolt kit for Small Block Chevy (SBC). For use with steel oil pans ONLY. Will not fit cast aluminum oil pans.
This individual throttle body EFI system has all the flash of classic Weber induction, but provides a higher state of tune and engine performance. The system delivers crisp performance for allsmall block Chevyengines up to 1000 hp. Fuel and air is delivered through precision cast aluminum 50mm IDA style throttle bodies that allow far superior idle characteristics and astounding throttle response while improving emissions and economy through tight air/fuel ratio control.
This individual throttle body EFI system has all the flash of classic Weber induction, but provides a higher state of tune and engine performance. The system delivers crisp performance for all 289 and 302 engines up to 1000 hp. Fuel and air is delivered through precision cast aluminum 50mm IDA style throttle bodies that allow far superior idle characteristics and astounding throttle response while improving emissions and economy through tight air/fuel ratio control.
This individual throttle body EFI system has all the flash of classic Weber induction, but provides a higher state of tune and engine performance. The system delivers crisp performance for all 351W engines up to 1000 hp. Fuel and air is delivered through precision cast aluminum 50mm IDA style throttle bodies that allow far superior idle characteristics and astounding throttle response while improving emissions and economy through tight air/fuel ratio control.
Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smallerdiameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.
Cast aluminumdouble groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevyshort style water pumps.
Cast aluminum single groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.
Cast aluminum double groove V-beltcrankshaft pulley foruse with '69-'85 Small BlockChevylong style water pumps.
1949-1953 Flathead stock angle water necks are made of cast aluminum for a durable seal.
This polished, cast aluminum oil pan replaces your original Turbo350 automatic transmission pan.Aluminum fins provide more cooling than stock-type steel pans.
This polished, cast aluminum oil pan replaces your original Turbo 400 automatic transmission pan. Aluminum fins provide more cooling than stock-type steel pans.
This polished, cast aluminum oil pan replaces your original 700R-4 automatic transmission pan. Aluminum fins provide more cooling than stock-type steel pans.
Replacement pairs of matched belts for Speedway small block Chevycast aluminum pulleys for short water pump.
Polished, 1-piececast aluminum finned oil pan, ribbed for beauty, strength and heat dissipation. This pan uses a drivers side dipstick. Includesdrain plug and mounting bolts.
Replacement pairs of matched belts for Speedway small block Chevy cast aluminum pulleys forlong water pump.
Replacement pairs of matched belts for Speedway small block Chevycast aluminum pulleys for long water pump.
Replacement pairs of matched belts for Speedway small block Chevy cast aluminum pulleys for short water pump.
Cast aluminum3-groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.
Kit includes a cast aluminum double groove water pump pulley anddouble groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.
The perfect finishing touch for your small block Chevy engine. These cast aluminum standard height valve covers fit 1960-86 small block Chevy V8.
These thermostat housings are die-cast, polished aluminum.The O-ring sealed water neck rises at a 15 or 45 angle and can be rotated 360 for best possible radiator hose access.Includes hardware.
Includes two tallcast aluminumvalve covers, two shielded breathers, one crossover tube, four stainless clamps and two hoses.
Pivoting water neck is die-cast, polished aluminum. The O-ring sealed water neck rises at a 90 angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1/2" I.D. hoses. Includes hardware.
Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes.Plain, as-cast finish.