No items in Shopping Cart
Kit consists of:
This kit includes two pairs of black rubber bushings to fit the eyes on one Carrera Hyper Shock. Bushings fit inside a 1-1/16"eyeand havea 5/8" I.D.
This kit for the Speedway'32 Lo-BoyRoadster includesCarrera Chrome short shocks for the front,black paintedshort shocks for the rear, and shock mounting hardware.
Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.
Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel?This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you.You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.
For use with 9" 26 & 26A Series 2-1/2" I.D. Springs Kit includes components for one shock
Includes 2 replacement perch bolts and 2 bolt-on frame brackets. No welding or cutting necessary. Typically used with stock or "split" wishbones. Works well wtih shock 582SM500 (or equivalent).
WARNING: DRIVING A LOWERED VEHICLE COULD BE DANGEROUS AND COULD CAUSE DAMAGE TO YOR SUSPENSIONThe original intent of the air spring was to provide a very smooth ride. It was not designed to provide an adjustable ride height. You can not drive the vehicle at any ride height you select. All suspension systems are designed to operate at a specific midpoint position, with provisions for suspension travel. The Mustang II suspension is no exception. It has a specific mid-point position which is when the lower control arms are level. The ...
Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel?This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you.You get two adjustable coilover shock assemblies that have a single knob with 12 valving options and two coil springs.
Shock mount kit for leaf spring installationsIncludes; shocks, lower spring plates, bushings and hardwareDesigned specifically for 35-40 Ford
Designed for 1963-72 Chevy trucks that have been lowered more than 3" in the rear. Our kit will mount the shocks at the correct angle allowing for more shock travel and a smoother ride.
This kit does it all! It lowers your truck 5", Corrects the shock angle so shocks work correctly, AND centers the rear axle. (All this is recommended when lowering 5" or more.) Includes 5" drop springs and shocks, deluxe trac bar, hardware and shock relocation kit.
Tech Tip: Take the right rear brake off and put it on the left rear. It works like a tie down shock.