No items in Shopping Cart
617-4020: AN6 Holley Single Feed 600-660 Series, Holley Dual feed 4010-4011 Series and all two barrel series with 9/16"-24 thread.
#6 Ford, Chrysler and early Chevy fuel pumps with 1/2"-20 inverted flare thread.
This kit has everything needed to rebuild any Edelbrock 94 or Holley 94 2-barrel 3-bolt flange carberetor. Includes fuel inlet seat, fuel inlet needle, accelerator pump assembly, accelerator pump spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all necessary gaskets.
These100% new, high performance mechanicalfuel pumps were designed & built to feed multi-carb setups. Works well with any Offenhauser Flathead Ford intake manifold.
Here you get the hose, hose end fittings and fuel pump fitting if required. Choose from push-on steel or aluminum fittingswith blue hose, or aluminum fittings with stainless steel braided hose. AN8 hose only.
Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.
Carter Super mechanical pumps contain heavy-duty diaphragms, high speed anti-float springs, large full flow valves, lightweight all-aluminum castings and a tough, heat-treated lever. The fittings are installed at the factory, not welded on like many competitors. Plus, they are made of steel to resist damage from cross threading.
These slick inlet fittings have two AN6 ports built in to run your returns to. They screw into the AN8 inlet side of your fuel pump and allow either an AN10 or AN12 line to be used.
Holley's Red Electric fuel pump is a standard pressure street pump for gas only. It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. 3/8" NPT inlet and outlet.
Holley's Blue electric fuel pump with regulator is a max-pressure performance pump for gas applications only. The pressure is preset at 14 psi and the free capacity is 110 gph. It flows 70 gph while maintaining 9 psi. Regulator 427-12803 is supplied. 3/8" NPT.
These all-new (not rebuilt) mechanical fuel pumps from Holley have a 7-1/2 psi shut-off pressure and deliver 80 GPH. The adjustable lower housing permits fuel ports (1/4" NPT) to be rotated for best fuel line access.
You aren't going to get very far if your fuel pump ain't pumping! These are new pumps, not rebuilds. Features an internal 4" canister-style filter.
1949-1953 Ford fuel pump push rod. 10-1/16" long for Ford & Mercury Flathead V-8. .430" diameter
Designed to meet or exceed OEM specifications for fit and performance.Fits 49-50 Ford flat heads with vacuum pump Inlet size 1/2"-20Outlet size 1/2"-20Pressure rating 4-6 PSI
These all new replacement mechanical fuel pumps are designed to fit the 1947-1948 Flathead Ford V8.