No items in Shopping Cart
#6 Ford, Chrysler and early Chevy fuel pumps with 1/2"-20 inverted flare thread.
617-4020: AN6 Holley Single Feed 600-660 Series, Holley Dual feed 4010-4011 Series and all two barrel series with 9/16"-24 thread.
Carter Super mechanical pumps contain heavy-duty diaphragms, high speed anti-float springs, large full flow valves, lightweight all-aluminum castings and a tough, heat-treated lever. The fittings are installed at the factory, not welded on like many competitors. Plus, they are made of steel to resist damage from cross threading.
These Super Street Racing mechanical fuel pumps from Carter feature high speed anti-float springs, a heavy duty diaphragm with special springs and rugged lightweight aluminum castings. It also has large, full-flow valves and a tough heat-treated lever.
These mechanical fuel pumps from Carter feature high speed anti-float springs, a heavy duty diaphragm with special springs and rugged lightweight aluminum castings. It also has large, full-flow valves and a tough heat-treated lever. For gasoline only.
Here you get the hose, hose end fittings and fuel pump fitting if required. Choose from push-on steel or aluminum fittingswith blue hose, or aluminum fittings with stainless steel braided hose. AN8 hose only.
Speedway Electric fuel pump is a standard pressure street pump for gasoline only. It has a maximum pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required.
Speedway's Blue electric fuel pump with regulator is a max-pressure performance pump for gas applications only. The pressure is preset at 14 psi and the free capacity is 110 gph. It flows 70 gph while maintaining 9 psi. Regulator 91012803 is supplied. We recommend using the hose barbs included with the pump and 3/8" hose.
Speedway fuel pumps are designed for street/strip application. Externally accessible pressure relief valves and repair kits are readily available. Not for use with fuel injection systems. Compatible with alcohol or methanol fuels. Flows 140 GPH (free flow). Pressure is pre-set at 9 PSI. A regulator is required. We recommend using the hose barbs included with the pump and 3/8" hose.