No items in Shopping Cart
This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. Includes AN 6 pressure and return and choice of AN 8 or AN 10 reservoir hose and hose fittings.The AN8 hose kit includes 4' of AN6 high pressure hose, 5' of AN6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45 AN6 and one 90 AN6 fittings are included as well as an AN6 straight brass push-on and one AN6 and two AN8 90 push-on hose ...
Braided Slider Hose 940-1899
Our universal 1964-1972 GM Car power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. Return hose will normally need to be cut to length.
This item has been DISCONTINUED and is no longer available for sale. We do not accept backorders on this part.
Show some style! Add some sparkle! Replace your 59A flathead's original cylinder head-to-radiator hoses with these polished stainless or chrome-plated pieces. Each kit replaces both upper hosesfor a flathead Ford V8 and includes two chrome or stainless tubes, four 3-ply rubber connector hoses, and eight hose clamps.
Dress up the flathead in your postwar Ford or Mercury by replacing the original cylinder head-to-radiator hoses with these stainless or chrome-plated pieces. Each kit replaces both upper hoses on a Flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.
Dress up your Flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each kit replaces both upper hoses on a Flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.
Show some style! Add some sparkle! Replace your Flathead's original cylinder head-to-radiator hoses with these polished stainless or chrome-plated pieces. Each kit replaces both upper hoses on a Flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.
91032530Hose ID0.430"Hose OD0.670"Fitting End AHigh Pressure Line: 1/2"-20, Low Pressure Line: 5/8"-18Fitting End BHigh Pressure Line: 5/8"-18,Sold in QuantityEachNotesHigh pressure line is 16-1/2" w/ 90 deg. fittings on both ends. Low pressure line is 24" long w/ one 90 deg. fitting. Includes 3 flare inserts.
These stainless steel braided power steering hose kits allow you to fit them to your 1980-Up GM for a custom look.
These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.
Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.
This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.
DOT approved brake line kits include two stainless steel-3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
These stainless steel braided power steering hose kits allow you to fit them to most 1965-1979 GM car & truck boxes with flare fittings.
Here you get the hose, hose end fittings and fuel pump fitting if required. Choose from push-on steel or aluminum fittingswith blue hose, or aluminum fittings with stainless steel braided hose. AN8 hose only.