Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Ford C4 Transmission Drive Shaft Slip Yoke

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Steel
Overall Length:
7.50
Sold in Quantity:
Each
Finish:
Natural
Shaft Diameter:
1.4375
Shaft Length:
5.00
Garage Sale:
No
Ford C4 Transmission Drive Shaft Slip Yoke

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This Ford C-4 driveshaft slip yoke measures 6.5" from the center of the U-joint cup to the front end of the yoke. Fits transmissions with 28 spline tailshafts. Accepts 1310 style U-joints (popular Chevy) with 1-1/16" cups and a spread of 3-7/32".

 

Note: Due to the length of the yoke, it will fit C4 transmissions ONLY, and is not recommended for use on an AOD transmission. The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall.

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

DYNO
Verified Purchaser
WINCHESTER VA 22601
Product Rating

GREAT PRODUCT

March 02, 2012
WORKS GOOD ON T-5 MUSTANG TRANSMISSION
Pros:
  • Easy To Install
  • Lightweight
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
80292440

Product Q&A

4 questions : 4 answers

1 answers

does this yoke fit a ford T-5

black30
Illinois, USA
September 15, 2014

does this yoke fit a ford T-5

Answers

September 16, 2014
EricM
You will need yoke number 91013128 or 91013328 for your Ford T5 transmission.
1 answers

will it fit 1980 c4 tranny does it have a flat spot in it

oggie
Seal Cove, Tremont, ME 04674, USA
July 23, 2014

will it fit 1980 c4 tranny does it have a flat spot in it

Answers

July 24, 2014
EricM
If your output shaft has a flat spot (referred to as a master spline) simply block off the half with the master, count the other half and multiply times 2. If you come up with 28 splines then this yoke would be the correct one. This yoke does not have the master spline in it but it is not necessary on the yoke even though your output shaft has a master.
1 answers

Dose this drive shaft yoke fit London taxi tx2?

Aliamrani
February 16, 2014

Dose this drive shaft yoke fit London taxi tx2?

Answers

February 17, 2014
EricM
This yoke fits Ford C4 transmissions with 28 spline output shaft only. Sorry I do not have the correct yoke for your application.
1 answers

Do the splines come out to the front end of the yoke?

Jay
Dover, PA.
June 07, 2011

Do the splines come out to the front end of the yoke?

Answers

June 08, 2011
Jason
Yes, splines go to end of yoke
Page 1 of 1

You may also be interested in:

Drive Shaft Safety Loop
(Part #91048312)
                        This driveshaft safety loop holds the drive shaft in place in case of universal joint failure. Made from 2" x 1⁄4" hot rolled steel with grade 5 bolts. Bolt-on installation.
                    
Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
(Part #91048314)
                        Speedway universal driveshaft U-bolts are forged steel for 50% more strength than standard units. Fits U-joints with 1-1/8" diameter caps.
                    
Speedway Steel Drive Shaft
(Part #910483)
                        

Lightweight steel driveshaft lengths measured from center of U-joint to center of U-joint. Driveshafts are not dynamically balanced. We recommend dynamically balancing the driveshaft prior to installation. Several lengths are available.

  • Super strong and much lighter
  • 2" O.D. tubing with .083" wall
  • Forged yokes
  • Painted white for high visibility on the track
  • Fits most IMCA modifieds

U-joint # 91048315 works for the front U-joint position on these driveshafts and with the front yokes we sell. Any of the three U-joints listed will work on the rear U-joint location based on rear axle requirement.

Dana Spicer 15-153X Standard Greaseable Cross U-Joint, Chevy 1310 Series
(Part #910415153)
                        

Dana OEM quality service replacement U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat treated for maximum life. The bearing cups are case hardened for strength and durability. The seals are made from nitrile rubber for optimum grease retention and contaminant exclusion. All of this is why we can say that genuine Spicer parts meet the rigorous Dana standards that have made it the global leader in automotive u-joint technology.

SVL U-Joints are designed and tested to deliver reliable performance and value. When it comes to repairing or maintaining your vehicles, you can rest assured knowing all SVL products are engineered to meet the unique needs of the aftermarket and are backed by Dana Spicer.

  • Standard Cross U-joint
  • 1310 Series
  • 3.219 x 1.062 x 3.219 x 1.062
  • Greaseable w/zerk

 

Dana Spicer 5-1310X Heavy Duty Cross Shaft U-Joint, 1310 Series, Non-Greaseable
(Part #910451310)
                        

Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

  • Heavy Duty U-joint
  • 1310 Series
  • 3.219 x 1.062 to 3.219 x 1.062
  • Non-Greaseable cross shaft


Dana Spicer 5-134X Heavy Duty Conversion U-Joint, Chevy/Ford, 1310 - 1330
(Part #91045134)
                        

Spicer OEM quality service replacement U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat treated for maximum life. The bearing cups are case hardened for strength and durability. The seals are made from nitrile rubber for optimum grease retention and contaminant exclusion. All of this is why we can say that genuine Spicer parts meet the rigorous Dana standards that have made Spicer the global leader in automotive u-joint technology.

SVL U-Joints are designed and tested to deliver reliable performance and value. When it comes to repairing or maintaining your vehicles, you can rest assured knowing all SVL products are engineered to meet the unique needs of the aftermarket and are backed by Dana Spicer.

  • Conversion U-joint
  • Mixed 1310 Series to 1330 Series
  • 3.219 x 1.062 to 3.625 x 1.062
  • Greaseable w/zerk
Dana Spicer 5-3613X U-Joint w/Coated Caps for AlumDriveshaft, 1310 Series
(Part #910453613)
                        

Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

  • Coated Caps
  • 1310 Series
  • 3.219 x 1.062 
  • For use with Aluminum drive shafts
  • Non-Greaseable cross shaft


Dana Spicer 5-460X Greaseable Cross Conversion U-Joint, 1310 to 1350 Series
(Part #91045460)
                        

Spicer OEM quality service replacement U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat treated for maximum life. The bearing cups are case hardened for strength and durability. The seals are made from nitrile rubber for optimum grease retention and contaminant exclusion. All of this is why we can say that genuine Spicer parts meet the rigorous Dana standards that have made Spicer the global leader in automotive u-joint technology.

SVL U-Joints are designed and tested to deliver reliable performance and value. When it comes to repairing or maintaining your vehicles, you can rest assured knowing all SVL products are engineered to meet the unique needs of the aftermarket and are backed by Dana Spicer.

  • Conversion U-joint
  • 1310 Series to 1350 Series
  • 3.219 x 1.062 x 3.625 x 1.188
  • Greaseable w/zerk
1310 Series Chevy to Chevy U-Joint
(Part #91048315)
                        High quality, heat treated forged steel replacement U-joints. Comes with outside retaining clips.
                    
1310 / 1330 Series Chevy to Ford U-Joint
(Part #91048316)
                        

High quality, heat treated forged steel replacement U-joints. This u-joint only works with clips outside the end caps. Clips included. The caps do not have grooves for clips.

1310 / S44 Series Chevy to Ford U-Joint
(Part #91048317)
                        High quality, heat treated forged steel replacement U-joints. The endcaps on the 3-5/8" width side have grooves for "inside clips." There are no grooves on the 3-7/32" width endcaps, therefore that side MUST use external clips. All four clips included.