Brake Lines Kit

These kits allow you to put disc brakes on your 1957-64 Ford 1/2 ton pick-up. Kit Includes: 11-3/4" brake rotor, 5 x 5-1/2" Brake pads GM Caliper slide bolts Rubber Brake Lines Rebuilt 1971-76 calipers (7/16"-20 inlets) Brake brackets Hardware Seals Inner bearing cups Inner bearing cones Spacers Outer bearing cones Dust caps Instructions Instructions    

Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy-to-install brake line tabs and clips. 18" lines including fittings 3/8"-24 IFF and 7/16"-20 Lines are 18" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy to install brake line tabs and clips. 15" length including fittings 3/8"-24 IFF and 10mm-1.5 Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses. These brake lines are garages sale priced because they are new old stock.NO WARRANTY NO RETURNS ON GARAGE SALE ITEMS

940-31850 - Simply zip-tie this Sprint car AN2 soft line system in place of your hard-line to increase brake pressure eliminate threaded joints and add durability. A direct replacement consisting of AN3 female ends and coated braided line. Outfit your third caliper with the additional line and fitting kit. Works with or without a residual valve.

Simply zip-tie this Mini/Micro Sprint AN2 soft line system in place of your hard-line to increase brake pressure eliminate threaded joints and add durability. A direct replacement consisting of AN3 female ends and coated braided line. Fits Stallard type chassis with elevated and cross mounted master cylinder.

This kit equalizes brake pressure to each side of your inboard calipers. That gives you even pad wear and a more consistent pedal.For calipers with a 1/8" npt port in each side of caliper.AN 3 inlet.

OEM Tubular Arm Bushing KitUMP Approved

Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit.     This is Garage Sale priced because it is missing one of the brake lines typically included with this kit.   NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines. 

Trigger type vacuum pump comes complete with all necessary hardware. Makes bleeding your breaking system by yourself an ease. Vacuum brake bleeding kit also works great for siphoning or transferring fluids from tanks and reservoirs.Includes:Hand vacuum/pressure pump 4.5 oz. fluid reservoir bottle with fluid transfer and storage lids (2) Tapered bleed screw adapters (2) Universal bleed screw adapters 1/4" ID x 1-1/2" long connection tube 1/4" ID x 24" long connection tube User manual910-83895 Instructions (PDF)Read more about bleeding brakes in our tech article How To Bleed Your Brake ...

This brake kit includes Mustang II/Pinto brake componentsto fit the'32 Lo-Boy1949-54 Chevy spindles. Kit features 9-1/4" iron rotors rebuilt single piston calipers pads stainless braided AN 4 brake lines fittings & hardware.NOTE: Kit includes rotors with 5 on 4.5" bolt pattern. If you need the 5 on 4.75" bolt pattern please specify this in the Comments box on the Order Summary/Payment Info page (page 2) when checking out.

This brake kit includes Mustang II/Pinto brake components to fit the Track-T 1949-54 Chevy spindles. Kit features 9-1/4" rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines, fittings, & hardware. NOTE: Please specify desired wheel bolt pattern (5 x 4.5" or 5 x 4.75") in the Comments box on the Order Summary/Payment Info page (page 2) when checking out. 

Use to eliminate bubbles trapped in master cylinderEnsure full evacuation of air in brake systemA must-have for any brake master installation Read more about bleeding master cylinders in our tech article How To Bleed Your Brake Lines.

Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.   These brake lines are garages sale priced because they are new old stock.   NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets. Kit includes: Street brake pads 12" brake rotors GM '69-'77 mid-size single piston iron calipers Caliper slide bolts Rubber brake Lines Bearings & Seals Spindle nut kit  Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when ...

Fits our 910-34906 and 910-34908 2" dropped spindles. (Will not fit stock spindles.) For 1964-1972 Chevelle/Malibu/GTO/Lemans/442/Cutlass/Skylark GM A-bodies, and 1967-1969 Camaro/Firebird GM F-bodies. The brake kit uses the common single piston '78-'88 GM Metric calipers and 10-1/2" vented rotors with a 5 on 4-3/4" bolt pattern. Calipers have 7/16"-20 inlets. Includes rubber brake lines and zinc plated dust caps.

You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line four 18" stainless steel braided -3 ANbrake hoses four brake line mount tabs and clips two 3/8"-24 inverted flare T-fittings four 3/8"-24 IFF to -3ANmale adapters six 3/8"-24 IFF ...