No items in Shopping Cart
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
Our 3/16" stainless steel tubingis made from304 grade (rated at 6000 psi)which is double annealedto alloweasy flaring.
Lever type tubing bender features a 10" handle that gives plenty of leverage to make smooth, professional, 5/8" radius bends in 3/16" stainless or mild steel brake line tubing.The graduated scale of the hard steel die permits accurate, repeatable bends time after time.
Steel7/16"-24 IFM thread nuts for 1/4" brake linetubing when double flared to 45.
Great for brake line or aluminum fuel line.
Steel3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45.
This is the best flaring tool for the money we have found. It has a ratcheting feed screwwith ahardened flaring coneeccentricallymounted inneedle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling.It will put a 37 degree flare in 3/16", 1/4", 5/16", 3/8", 1/2 ", 5/8" and 3/4" tubing. We recommend this tool when flaring 3/16" stainless steel brake line.
This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45 double flare with a 3/8"-24 male fitting. Seven different lengths available.
These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45 inverted flare.
Use these 100% stainless steelfittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fitsframe rails 2-1/4"to 2-3/4" wide.
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
Use this handy tool to double flare mild steel brake lines just like the brake shop does. This tool makes 45 flares only. For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only, NOT to be used with stainless steel line. If using 37 AN fittings with stainless steel line, use 910-89524.
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel -3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel-3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
Use these 100% stainless steelfittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fitsframe rails 1-1/2"to 2" wide.
25 ft. of line with all necessary fittings. Save time and weight. Will do most modifieds or sprint cars. 1/8" NPT fittings. 1900 psi burst pressure. Not for street use.
Hydraulic line pressure keeps brake secure. No special linkage. Not recommended for use with silicone brake fluid or as an emergency brake. Features 1/8" NPT female on inlet/outlet.
These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.