Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide. Sold in pairs.
These steel banjo fittings adapt a 3/8" or 10mm-1.5 banjo bolt to a AN style brake line. Crush washers not included. Must also purchase our 10mm crush washers. Banjo fittings sold in pairs.
Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 2-1/4" to 2-3/4" wide. Sold in pairs.
This aluminum fitting will accept AN4 on one end, and the common 3/8"-24 female inverted flare on the other. It includes a jam nut for easy tab mounting.
This aluminum fitting will accept AN4 on one end and the common 3/8"-24 female inverted flare on the other. It includes a jam nut for easy tab mounting.
Made from high-quality steel these bulkhead adapters from Speedway give you an easy way to connect lines through firewalls or frames.Steel Male Adapter Connector Fitting AN to IFM all steel adapter7/16 Inch-20 IFM to -4 AN
Master cylinder replacement/repair parts for US Brake single piston aluminum master cylinders.Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks soft pedal and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.Racer Note: When rebuilding brake master cylinders and calipers always lubricate internal parts with brake assembly fluid before installation.This will keep seals and o-rings from becoming damaged by dry ...
This 1/8" female to -4 AN male 90° elbowadapterfitting is useful when plumbing any pressure gauge.Blue anodized finish.
Brake system fittings to complete your brake plumbing project. Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.
Straight union standard nut compression fitting for 3/16" diameter nylon tubing.
Brake system fittings to complete your brake plumbing project.Racer Note: Racing brake calipers if properly maintained can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.
Brass 90°elbow 1/8" NPT male to 7/16"-24 inverted flare female brake line adapter fitting.
Brass 90° 3/8"-24 inverted flare female to 1/8" NPT male brake line adapter fitting.
Brass 90° elbow 1/8" NPT male to 7/16"-24 inverted flare female brake line adapter fitting.
This fitting is garage sale priced because it has been discontinued from our current product line.NO WARRANTY NO RETURNS ON GARAGE SALE ITEMS
This banjo bolt kit connects a -3 AN line to a master cylinder that has a 3/8-24 outlet.
These steel banjo fittings adapt a 3/8" or 10mm-1.5 banjo bolt to a AN style brake line. Crush washers not included. Must also purchase our 10mm crush washers.Banjo fittings sold in pairs.
RapidAir Maxline industrial compressed air piping systems are fast and easy to install. They feature leakproof, corrosion resistant fittings that are built to last. These fittings connect 3/4" tubing to 1/2" tubing together at line breaks. These air hose connectors work great for your workshop with applications from automotive to woodworking. Ideal for connecting 3/4"hose to 1/2" hose for an increase or decrease in hose size Nickel plated brass Double o-ring design Split ring allows disassembly No expensive tools required Operating pressure: 175psi at 70° F / 140psi at 140° ...