No items in Shopping Cart
Kit Includes:
This Dirtworks 4-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.Kit includes:RH & LH Brake Brackets7/16"-20 RH & LH Metric CalipersWilwood Polymatrix D GM Metric PadsSlide Bolt GM Caliper7/16" to AN4 Banjo Fittings7/16"-20 Banjo FittingsLightweight Brake Line3/8"-24 Female to AN4 Fittings19" Brake Line w/ 90 Ends26" Brake Line w/ 90 EndsMini Brake Gauge Panel
**This model has been discountinued. As an alternate, use kit 910-31998 (at right).**
This Dirtworks 2-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.Kit includes:RH & LH Brake Brackets7/16"-20 RH & LH Metric CalipersWilwood Polymatrix D GM Metric PadsSlide Bolt GM CaliperCaliper Brackets7/16" to AN4 Banjo Fittings7/16"-20 Banjo FittingsLightweight Brake Line3/8"-24 Female to AN4 Fittings19" Brake Line w/ 90 Degree Ends26" Brake Line w/ 90 Degree EndsMini Brake Gauge Panel
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. Hat fits 5 lug hubs with4-1/2", 4-3/4",or 5" bolt circle.
Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. Uses Ford bolt pattern 5 on 4-1/2".
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steeringarms, tie rod assembly and hardware.
Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. Steel hat fits 5 lug hubs with4-1/2", 4-3/4",or 5" bolt circle.
Wilwood Forged DynaliteFront Drag BrakeKit offers a complete disc brake upgrade solution for Mustang II-equipped drag race application under 2800 lbs. Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for an off road drag racing application.
Wilwood Forged DynaliteFront Pro Series BrakeKits offer a complete disc brake upgrade solution for Mustang II-equipped street rodsand classic pickups.Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.
This heavy duty Wilwood brake kit is just the ticket for your '55, '56 or '57 Chevy car. Features 4-piston billet Dynalite calipers, aluminum hubs, 11-3/4" vented rotors and required brackets and hardware. Calipers have 1/8" NPT inlet. Works with 15" and larger wheels.
This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.
Fits our 910-34906 and 910-34908 2" dropped spindles. (Will not fit stock spindles.) For 1964-1972 Chevelle/Malibu/GTO/Lemans/442/Cutlass/Skylark GM A-bodies, and 1967-1969 Camaro/Firebird GM F-bodies.
Includes allbrackets and hardware. This kit fits stock '55-'57 Chevy spindles. Will not fit our 2" drop spindles. Calipers have 1/8" npt inlet.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, spindles, dust caps, spindle nuts, AN3 caliper fittings, Rubber Brake Lines, kingpins, flat steeringarms, tie rod assembly and hardware.
Disc brake kit for 2" drop spindles 910-34399 ONLY.
Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2" of drop built in. Plus,dropped spindles maintainfactory steering & suspension geometry sooriginal steering arms can be used.
Want to lower your 1963-70 Chevy truck, get better brakes and improve your wheel selection, all at the same time? This bolt-on package is for you! It includes new 2-1/2" drop spindles that will bolt to stock ball joints and tie rods, making it simple to swap disc brakes. The kit also includes new brake rotors with popular 5-on 5-lug pattern (with 1/2" studs,) plus calipers, bearings, seals, spindle nuts, dust caps, banjo bolts and brake hoses. Kits may not work with factory drum brake wheels.
These kits include our Gasser straight front axle, semi-elliptical springs, spindles, kingpins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 x 4-1/2" or 5 x 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM Metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, rubber brake lines, spindles, dust caps, spindle nuts, AN3 caliper fittings, kingpins, flat plate steeringarms, tie rod assembly and hardware.
This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.
Easily installs 11" rotors and the 1978-88 GM Metric calipers to your 1937-48 Ford passenger car spindles withno machine work needed. This kit works well with bolt-on steering arms.
Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuimWilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master ...