These wide 5 wheel adapters are 3/8" steel with 5/8" UNF studs. Adapts your "early modified" wheels to today's more popular bolt patterns. Must use spacer with drum brake. The bolt heads on the back side of the adapter do not sit flush, contacting the brake drum. The thickness of the spacer would depend on the specific brake drum being used, but the 1/4" 916-58210 or 3/8" 916-58212 should work for many applications. Both of these spacers would work on the 916-58250.
These wide 5 wheel adapters are 3/8" steel with 5/8" UNF studs. Adapts your "early modified" wheels to today's more popular bolt patterns. Must use spacer with drum brake. The bolt heads on the back side of the adapter do not sit flush, contacting the brake drum. The thickness of the spacer would depend on the specific brake drum being used, but the 1/4" 916-58210 or 3/8" 916-58212 should work for many applications. Both of these spacers would work on the 916-58251.
These steering wheel adapters allow you to put the common three-bolt steering wheels on your Yamaha, Club Car or EZ-Go golf carts. Note -NOT for use with our golf cart tilt columns.
Features a chromed steel skirt with a streamlined shape to complement the Grant Classic Banjo series steering wheels. Adapter specifically matches the center hub diamter on steering wheels 4101050 and 4101057 with the 5 on 2-13/16” bolt circle. Raises the wheel 1-5/8”.
This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces. Adapter Application Chart (GIF) 410-3294 Instructions (PDF)
This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces. Adapter Application Chart (GIF) 410-3249 Instructions (PDF)
This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces. Adapter Application Chart (GIF) 410-3285 Instructions (PDF)
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, spacer ring, plunger spring, lead wire and three mounting bolts. 2-3/8" I.D. holes for the horn plunger lead wire. Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread. Horn button isolator plate is 2-15/16" O.D. Adapter Application Chart (GIF) Note: When using this adapter, if the column has not previously had a steering wheel mounted, ...
This polished billet aluminum steering wheel adapter allows you to put common 3-bolt steering wheels on Ididit and most 1969-1994 GM columns. This hub adapter comes with a spring for the horn button and a plunger/spring assembly. Top is 11/16" x 36 spline I.D. (GM, Ididit, Flaming River columns) Bottom is 1/2" straight and .753 I.D. to fit a 3/4" shaft 1-3/16" tall 2-1/2" I.D. holes for the horn plunger lead wire Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, spacer ring, plunger spring, lead wire and three mounting bolts. Adapter Application Chart (GIF) Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required. Steering Wheel Installation Instructions (PDF) 11/16" x 36 spline I.D. 2-1/2" O.D. 1" tall 2-3/8" I.D. holes for the horn plunger lead ...
If you swap out the front brakes or rear axle on your car, the bolt patterns may not match. These billet 6061-T6 aircraft aluminum adapters will allow you to switch bolt patterns. Spacers are equipped with 12mm-1.5 metric studs and 12mm-1.5 plain tapered open end wheel nuts. You may need to purchase new 12mm-1.5 nuts to fit your wheels from a local wheel shop. Sold in pairs. 720-3609 Instructions (PDF)
If you swap out the front brakes or rear axle on your car, the bolt patterns may not match. These billet 6061-T6 aircraft aluminum adapters will allow you to switch bolt patterns. Spacers are equipped with 12mm-1.5 metric studs and 12mm-1.5 plain tapered open end wheel nuts. You may need to purchase new 12mm-1.5 nuts to fit your wheels from a local wheel shop. Sold in pairs. 720-3616 Instructions (PDF)
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM Ididit or Flaming Riversteering column. Horn button not included. Includes black metal cover horn button spring spacer ring plunger spring lead wire and three mounting bolts. Adapter Application Chart (GIF) Note:When using this adapter if the column has not previously had a steering wheel mounted # 910-64049 will also be required. 410-3196 Instructions (PDF)
These wide 5 wheel adapters are 3/8" steel with 5/8" UNF studs.Adapts your "early modified" wheels to today's more popular bolt patterns.Must use spacer with drum brake. The bolt heads on the back side of the adapter do not sit flush contacting the brake drum. The thickness of the spacer would depend on the specific brake drum being used but the 1/4" 916-58210 or 3/8" 916-58212 should work for many applications. Both of these spacers would work on the 916-58250.
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM Ididit or Flaming Riversteering column. Horn button not included. Includes black metal cover horn button spring spacer ring plunger spring lead wire and three mounting bolts. 2-3/8" I.D. holes for the horn plunger lead wire.Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread.Horn button isolator plate is 2-15/16" O.D.Adapter Application Chart (GIF) Note:When using this adapter if the column has not previously had a steering wheel mounted # 910-64049 will also ...
This polished billet aluminum steering wheel adapter allows you to put common 3-bolt steering wheels on Ididit and most 1969-1994 GM columns.This hub adapter comes with a spring for the horn button and a plunger/spring assembly.Top is 11/16" x 36 spline I.D. (GM Ididit Flaming River columns)Bottom is 1/2" straight and .753 I.D. to fit a 3/4" shaft1-3/16" tall2-1/2" I.D. holes for the horn plunger lead wireStandard 3-bolt pattern for custom steering wheels in 1/4" fine thread
If you swap out the front brakes or rear axle on your car, the bolt patterns may not match. These billet 6061-T6 aircraft aluminum adapters will allow you to switch bolt patterns. Spacers are equipped with 12mm-1.5 metric studs and 12mm-1.5 plain tapered open end wheel nuts. You may need to purchase new 12mm-1.5 nuts to fit your wheels from a local wheel shop. Sold in pairs. 720-3613 Instructions (PDF)
If you swap out the front brakes or rear axle on your car, the bolt patterns may not match. These billet 6061-T6 aircraft aluminum adapters will allow you to switch bolt patterns. Spacers are equipped with 12mm-1.5 metric studs and 12mm-1.5 plain tapered open end wheel nuts. You may need to purchase new 12mm-1.5 nuts to fit your wheels from a local wheel shop. Sold in pairs. 720-3617 Instructions (PDF)
Grant Billet Style Installation Kits are an optional styling upgrade. The Billet Style Kits have Grant's five-hole mounting pattern. The cool thing about the Billet Kits is they are designed to put the wheel back in as close to the stock position as possible. You cannot use this kit to install a Classic/Challenger/Performance Series Wheel (3 Bolt Pattern wheels). These adapters let you install Grant Signature Series and Collectors Edition steering wheels on these GM vehicles: 1969-1994 GM cars1974-1994 GM trucks1982-1994 GM vansThe standard shaft size this adapter fits is ...
These wide 5 wheel adapters are 3/8" steel with 5/8" UNF studs. Adapts your "early modified" wheels to today's more popular bolt patterns. Must use spacer with drum brake. The bolt heads on the back side of the adapter do not sit flush, contacting the brake drum. The thickness of the spacer would depend on the specific brake drum being used. May require a 6-pin spacer # 91658220.
If you swap out the front brakes or rear axle on your car the bolt patterns may not match. These billet 6061-T6 aircraft aluminum adapters will allow you to switch bolt patterns.Spacers are equipped with 12mm-1.5 metric studs and 12mm-1.5 plain taperedopen endwheel nuts. You may need to purchase new 12mm-1.5 nuts to fit your wheels from a local wheel shop.Sold in pairs.720-3617 Instructions (PDF)
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, spacer ring, plunger spring, lead wire and three mounting bolts. Adapter Application Chart (GIF) Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required. 410-3196 Instructions (PDF)