No items in Shopping Cart
18 super bright LEDsComplete with polycarbonate lensEpoxy coated, fully sealed electronicsSolid state circuit boards are designed for 7.7-14.0 VDCDual function, parking light and turn signalLooks original with deluxe stainless trim
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1" diameter, red or amber, and 1156. 1156 have the pins straight across and a single contact.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but areamber when illuminated.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but areamber when illuminated.
Improve safety and visibility in your 1957 Chevy with this bolt-in LED combination light. This single amber LED fists in the original signal lamp location on the grille bar and provides three lighting functions: a high-intensity daytime running light and turn signal, and a reduced intensity park light.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but areamberwhen illuminated.
Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.
Wire this third brake light in conjunction with tail lights. Billet aluminum with red lens. This LED third brake light is 2" tall and 7" wide. There is one wire coming through the base for power. A ground wire would be attached to the bottom of the mounting bolts at the base.
This LED lamp replaces your original assembly and turns it into a park light, turn signal light and daytime running light. It fits easily into the original location using the original bolts. Simple four wire hook-up connects to switched power, park light, turn light and ground. For 1940 Ford V8, Deluxe V8 and 1940-1941 Commercial vehicles.
The bulbs appear to be clear, but are the correct color when illuminated.
This handy light can be used as a 3rd stop light or any other use you can think of. Has five red LED bulbs. 12 volt.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are redwhen illuminated.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but arered when illuminated.
These taillights are among the best you will find for your old Plymouth. They feature chrome plated die-cast metal housings with stainless steel mounting studs, nuts and washers. They are a direct replacement with the benefits of LED brightness (14 LED's per light). Simple, clear wiring directions (12 volt only) and includes wiring and even taillight-to-body gaskets.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but arered when illuminated.