You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation. Direct hook up for 6-12 volts and does not require a resistor. Available in amber, green, blue, white, and red colors.
These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are amber when illuminated. LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED taillights will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)
These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are amber when illuminated. LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)
These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are amber when illuminated. LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)
You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and does not require a resistor. Available in amber, green and red colors.
You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and doesnot require a resistor.Available in amber blue green and red colors.
You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and does not require a resistor. Available in amber, blue, green, and red colors.
You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and doesnot require a resistor.Available in amber green and red colors.
5 led dual function top mount light Amber led/clear lens Same as used in 911-01020 series headlights Dual function 5 led light features one low function circuit (low brightness) and one high function circuit (high brightness)
You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation. Direct hook up for 6-12 volts and doesnot require a resistor.Available in amber green blue white and red colors.
These LED tail light bulbs put out the light you're after but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear but areamberwhen illuminated.LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED taillights will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)
These LED tail light bulbs put out the light you're after but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear but areamber when illuminated.LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)
These LED tail light bulbs put out the light you're after but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear but areamber when illuminated.LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)
These LED bolts can be used to add some style to your license plate frame or anywhere else on your car for that matter. The possibilities are endless. Features a chrome metal housing which is 1.24" in overall length with a threaded stud and nut for mounting. 12V or 6V operation but they are much brighter with 12V. LED lighted boltsChrome metal housing1.24" in overall length36" wire lengthThreaded stud and nut for mounting12V or 6V operation but much brighter with 12VAvailable in a selection of colors.These lights are sold as ...