No items in Shopping Cart
Replace those outdated and inadequate drum brakes on your vintage Ford Mustangwith thiscomplete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kitfor 1964-1966Mustang usesa 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.
Replace those outdated and inadequate drum brakes on your Ford Mustangwith thiscomplete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kitfor 1967-1969Mustang usesa 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.
**This model has been discountinued. As an alternate, use kit 910-31998 (at right).**
The Airheart 150x1 Series Disc Brake Caliper w/ Retracting Piston is designed to provide a maximum amount of braking power packed into a minimal amount of space for easy mounting. The 150x1 is typically used with spindle mount front wheels and is designed to be mounted in either the three or nine O'clock position on a disc. Either the caliper or disc must float. The 150X1 series features a single piston with a patented piston reactor. The body is made of die-cast aluminum alloy. Friction linings are available in both ...
The Airheart 175H Series hydraulically actuated caliper disc brake has a longer piston than the 150x1 caliper and provides better braking. It is typically used on spindle mount wheels & most Hallcraft/Dayton wire wheels. Designed to mount on a 1/8-inch disc.
This is a non-emergency brake rear disc brake conversion. Replace those old drum brakes with modern rear disc brakes. Features lightweight, black anodized aluminum 4 piston calipers, black steel 11-1/2" diameter 0.350" thick rotors, anodized aluminum hats and caliper mounting brackets, brake pads, hardware and complete instructions.Big Ford.
Easily installs 11" rotors and '69-'77 midsize GM single piston calipers to your classic Total Performance spindles. Kit comes complete with new rotors and semi-metallic pads, new bearings and seals, new caliper bolts and rebuilt calipers, along with caliper mounting brackets, bushings, hardware and instructions.
Easily installs 11" vented rotors and '69-'77 midsize GM single piston calipers to your classic Total Performance T-bucket spindles. Kit comes complete with new rotors and semi-metallic pads, new bearings and seals, new caliper bolts and rebuilt calipers, along with caliper mounting brackets, bushings, hardware and instructions.
Bolt-in ultra high performance disc brake conversion kit for 1964-74 GM A, F, & X Body. Kit includes street 4-piston aluminum calipers with 45mm stainless pistons, performance brake pads, mounting brackets, 11" Big Bite cross drilled rotors, and hardware.
Convert your straight axle truck to disc brakes with our bolt-on disc brake bracket kit. Kit is a true bolt-on using the factory holes on the 1/2 ton spindle. Kit includes caliper brackets, bearing adapters and mounting hardware.
Looking for a low cost way to add rear disc brakes to your Ford 8.8" or 9" equipped hot rod, without searching the junk yards? Look no further. This Ford Racing rear disc brake kit includes OE quality single-piston calipers, 11.8" vented rotors, E-coated caliper mounting bracket, and all mounting components. Plus, the E-coated backing plate features an integral parking brake for a convenient install.
This is a non-emergency brake rear disc brake conversion. Replace those old drum brakes with modern rear disc brakes. Features lightweight, black anodized aluminum 4 piston calipers, black steel 11-1/2" diameter 0.350" thick rotors, anodized aluminum hats and caliper mounting brackets, brake pads, hardware and complete instructions. Mopar.
This heavy duty Wilwood brake kit is just the ticket for your '55, '56 or '57 Chevy car. Features 4-piston billet Dynalite calipers, aluminum hubs, 11-3/4" vented rotors and required brackets and hardware. Calipers have 1/8" NPT inlet. Works with 15" and larger wheels.
Want to lower your 1963-70 Chevy truck, get better brakes and improve your wheel selection, all at the same time? This bolt-on package is for you! It includes new 2-1/2" drop spindles that will bolt to stock ball joints and tie rods, making it simple to swap disc brakes. The kit also includes new brake rotors with popular 5-on 5-lug pattern (with 1/2" studs,) plus calipers, bearings, seals, spindle nuts, dust caps, banjo bolts and brake hoses. Kits may not work with factory drum brake wheels.
This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.
This is the brake kit you Mopar guys have been waiting for. This complete disc brake kit is for 1962-1972 B-body and 1970-1974 E-body cars and includes rotors, spindles, calipers, brackets, pads, bearings, seals, dust caps, hoses and hardware for both front wheels. No machine work, bolts together. 11" outside diameter rotors. 5 on 4-1/2" bolt pattern.Calipers have 7/16"-20 inlet.