Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

All-In-One Roll Bar Accessory Clamps

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Anodized
Thread Pitch:
1/2"-20
Thread Pitch (2):
10-32
Overall Thickness:
.76
Inside Diameter:
1.50
All-In-One Roll Bar Accessory Clamps
All-In-One Roll Bar Accessory Clamps
All-In-One Roll Bar Accessory Clamps

Click image to enlarge

Details

Reviews (12)

Q & A (3)

What's in the Box

Info

These billet aluminum roll bar clamps work great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

Hood pins and brackets sold separately.

Customer Reviews

Rated 4.8 out of 5 by 12 reviewers.
RATING BREAKDOWN
12 reviews
5 Stars
9
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Warriors Watch Rider
Verified Purchaser
Verified Reviewer
Atco, NJ

Heavy duty light weight option!

July 21, 2016
Used these on my 2009 Road King to hang my siren speaker on my front crash bar . Glad there were multiple pre drilled holes which allowed for me to properly and safely secure the speaker. Only drawback and its only because of the application I was using it for is I wish they were polished chrome. Great product I'd purchase again in a heartbeat!
Pros:
  • Multiple Applications
  • Multiple Pre Drilled Hole
  • Lightweight And Durable
Cons:
  • Not Polished
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Berzerker
Verified Purchaser
Verified Reviewer
Daytona

works quite well

May 28, 2016
I purchased four of these clamps to install a 4 point harness on my Polaris Razor. The only drawback is it comes prefilled 1/2 inch bike 20 fine thread. There should be an option where it does not come drilled/tapped so you can drill and tap to accommodate your specific size bolts. Otherwise it work well
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Berzerker
Verified Purchaser
Daytona

Very nice but..

May 18, 2016
Very nice quality..fits very well . inexpensive. .but you should have the option to purchase these brackets undrilled... they come drilled and tapped for 1\2. ×30...
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Capt Kevin
Verified Purchaser
Verified Reviewer
Ct

Worked perfect for securing light bar on my boats bow rail.

May 18, 2016
Great versatile clamps
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

big john
Verified Purchaser
corbin ky

clamp on bracket

April 25, 2016
wanted to use for hood pin brackets I ended up welding bungs on the to work
Pros:
  • Lite Weight
Cons:
  • 12 Inch Hole Does Not Ha
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Charlie
Verified Purchaser
Verified Reviewer
Maine

nice product

February 07, 2016
Used for a windshield on my side by side
Pros:
  • Stronggood Looking
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Joe 13
Verified Purchaser
Verified Reviewer
Santa Ana California

I would buy again!

December 20, 2015
I fabricated hood hinges for my fiberglass hood on my 62 belair.
Pros:
  • Best Looking Clamp
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Dacey
Verified Purchaser
UK

Good enough to go on my Harley

September 14, 2015
Used to mount a side mount number plate on my Harley Davidson, onto the rear crash bars. The only clamp I could find that was any where hear the quality I was after, and once it arrived I could see the quality, fit and finish were all top notch. The only way it could get any better was if the alloy was polished, but to be honest, to keep the cost down, I can do that myself.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Jay
Verified Purchaser
Brisbane Australia

There da way to go

August 24, 2015
Top of the line for mounting old school Harley rear fenders on hot rod rigid bare boned bikes
Pros:
  • Ld School Harley Rear
  • Perfect For Mounting O
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

N/A
Verified Purchaser
Verified Reviewer
South Florida

Worked Perfectly

June 03, 2015
I used four of these to mount marine speaker pods onto my ski bar. Most bars are 1 1/2" but mine is 1" so it was difficult to find this size. I ordered these and they worked perfectly. They have 2 ways to mount to your object and provide a firm mount to the bar. They also look super nice. I highly recommend these.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 3 answers

1 answers

Hi i want to use this clamp on a piece of 1" galvanized steel pipe I have an aluminum dock that I need to attach a pice of 1" galvanized pipe to. What size fitting would I purchase? or will the 1" clamp work on 1" galvanized steel pipe? Thanks for making this beautiful product! Bob Costello

Bobbo
Peachtree City, GA, USA
January 18, 2014

Hi i want to use this clamp on a piece of 1" galvanized steel pipe I have an aluminum dock that I need to attach a pice of 1" galvanized pipe to. What size fitting would I purchase? or will the 1" clamp work on 1" galvanized steel pipe? Thanks for making this beautiful product! Bob Costello

Answers

January 20, 2014
EricM
You will need to check the exact outside diameter of the pipe you want to use this clamp on. Most galvanized pipe is specified by the inside diameter, then the wall thickness of the pipe will make to outside diameter vary. These are actually intended to be used on tubing which is specified by the outside diameter but it may be possible that your pipe is close enough to one of the sizes I offer to make them work.
1 answers

What is the dimension between the 10-32 holes?

steveejay
Lake Elsinore, CA, USA
April 03, 2013

What is the dimension between the 10-32 holes?

Answers

April 04, 2013
Jason
Center to centeron the mounting holes is 1-1/4". It is 1-1/16" between holes
1 answers

The description said the center hole is 1/2 inch. Do you have a clamp like this with a 1/4 20 center hole?

Bob
Bakersfield, Ca
May 27, 2015

The description said the center hole is 1/2 inch. Do you have a clamp like this with a 1/4 20 center hole?

Answers

May 29, 2015
Eric
Expert
Sorry we do not offer a clamp like this with a 1/4" x 20 thread size.
Page 1 of 1

You may also be interested in:

  • Wehrs Machine 1-1/4 Inch Clamp On Hood Pin Mount Wehrs Machine 1-1/4 Inch Clamp On Hood Pin Mount
    View
    (0)
    $24.99
    Compare
  • Wehrs Machine 1-3/8 Inch Clamp On Hood Pin Mount Wehrs Machine 1-3/8 Inch Clamp On Hood Pin Mount
    View
    (0)
    $26.99
    Compare
  • Wehrs Machine 1-1/2 Inch Clamp On Hood Pin Mount Wehrs Machine 1-1/2 Inch Clamp On Hood Pin Mount
    View
    (0)
    $24.99
    Compare
  • Wehrs Machine WM259F Hood Pin Adjustable Flanges, Aluminum Wehrs Machine WM259F Hood Pin Adjustable Flanges, Aluminum
    View
    (0)
    $11.99
    Compare
  • Wehrs Machine Gun Drilled Hood Pin with Shoulder Flange Wehrs Machine Gun Drilled Hood Pin with Shoulder Flange
    View
    (2)
    $7.99
    Compare
  • Wehrs Machine WM201 Hood Pin Scuff Plate, Aluminum Wehrs Machine WM201 Hood Pin Scuff Plate, Aluminum
    View
    (1)
    $1.99
    Compare
  • Wehrs Machine WM259NF Gun Drilled Hood Pin w/o Flange, 1/2-20 Thread Wehrs Machine WM259NF Gun Drilled Hood Pin w/o Flange, 1/2-20 Thread
    View
    (0)
    $5.99
    Compare
Suggestions For You