No items in Shopping Cart
This air cleaner has a drop down base that extends past the bottom 3/4" and fits the standard 5-1/8" carb neck. It is held on with a strap bracket up inside the air cleaner. The customer will remove the top, position the base on the carburetor and secure with a wing nut. Then the customer will simply reattach the top and go.
Speedway's Sure Seal Housing is manufacturedfrom spun aluminum with an O-ring seal.Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4". Includes air cleaner assembly,aspacer with anO-ring on the carburetor side (choose height), and a 1/4"-20 air cleaner stud.
This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you toraise the filter up for additional clearance.
14" diameter with 3" high filter to fit 4 bbl. carbs. with 5-1/8" or 7-5/16" diameter necks. Offers the racer maximum air flow with only 2-1/2" stack height above the carburetor lip.
Chrome plated steel 4 barrel carburetor air cleaner. 14" diameter with a 3" tall paper filter element.Fits carbs with 5-1/8" necks. Includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.
14" diameter with 3" high filter to fit 4 barrel carbs with 5-1/8" diameter necks. Offers maximum air flow with only 2-1/2" stack height above the carburetor lip.Dyno tests report that small blocks using Moroso air cleaners can produce 10 more horsepower than with other air cleaners.
Chrome plated steel 4 barrel carburetor air cleaner. 14" diameter with a 4" tall paper filter element.Fits carbs with 5-1/8" necks. Includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.
These 14" drop base air cleaners have a unique velocity stack design which drops 1-1/4" below carburetor flange. Each assembly features chrome plated top & bottom plates with 1/4" stud hole (stud not included). Also comes with rubber and steel mounting washers, but we recommend using SuperSeal gaskets 910-11101 for a complete seal.
Chrome plated steel 4 barrel carburetor air cleaner. Fits carbs with 5-1/8" necks. Has a 14" diameter with a 3" tall paper filter element. Includes a tri-bar wing nut, a mount stud and an adapter for the PCV inlet hose.
14" diameter with 3" high filter to fit 4 barrel carbs with 5-1/8" diameter necks. Offers maximum air flow with only 2-1/2" stack height above the carburetor lip. Dyno tests report that small blocks using Moroso air cleaners can produce 10 more horsepower than with other air cleaners.
91011066Overall Height1.750" (1 3/4")Inside Diameter3.000"Overall Diameter14.500" (14 1/2")Hardware IncludedNoMaterial TypeAluminumFinishNaturalSold in QuantityEach
Seals between air cleaner and standard 5-1/8" air horn.Prevents dirt from entering your engine. Reusable SuperSeal(TM) has stainless steel ring embedded in durometer-tested neoprene rubber.Won't collapse, tear or lose its shape.
Speedway's Sure Sealair cleaner baseis manufacturedfrom spun aluminum.Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4".
Chrome steel top and base3" paper element & polished steel mounting stud includedFits single quad carburetors with 5-1/8" neckDrop base
High flow K&N style air cleaner elements. Filter element measures 6-5/8" long, 4-1/2" wide and 2-5/8" thick. Fits 200-64280 Hi-Tek air cleaner.
Oval replacement paper element, 12" long x 2" high.
This all steel air cleaner is based off the 1951-1956 Olds & Caddy air cleaner. It uses an over-the-counter 14" x 4" replacement element. It's even notched out in the back to clear a GM HEI distributor. Fits 5-1/8" carb neck (most Holley, Quadrajet, Demon and Edelbrock carbs).
Chrome plated steel 4 barrel air cleaner. 10" diameter and 2"tall filter element.
Replace the lid of your 14" diameter air cleaner with this filter lid from K&N. Increases air flow by about 30%. Dyno tests have shown up to 20 hp increase.
91011360Overall Height0.700"Inside Diameter3.000"Overall Diameter5.500" (5 1/2")Material TypeAluminumFinishNaturalSold in QuantityEachNotesAllows use of a 4 BBL air cleaner on a 2 BBL carb w/ 3" O.D. top.
Just the ticket to top off your chromed out engine. Fits 5-1/8" carb necks which includes most 4 barrel Holley, Edelbrock, Demon, Q-jet and or Ford carbs(also fits Holley & Ford 2-bbl carbswith 5-1/8"neck).
Polished aluminum top and basePaper element & polished steel mounting stud includedFits single quad carburetors with 5-1/8" neck
Chrome plated steel 4 barrel (5-1/8" neck) air cleaner. 14" diameter and 2"tall paper filter element. There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb.
Why keep buying paper elements when this one could last a lifetime? This air cleaner assembly features a washable element, a beautiful chrome plated top and base designed for the common 5-1/8" carb neck.
K&N chrome velocity stack has a 5-1/8" carb neck, 10.5" overall height, and 9" x 5" filter element.