No items in Shopping Cart
Our steel fuel tanks accept aftermarket sending units and are an easy bolt-in installation.
The tank comes with a plug for the drain hole at the bottom, and a gasket and mounting screws for the sending unit (the flange for the sending unit has at least three, 5-and 6-screw patterns in it to accommodate nearly any original early Ford or aftermarket sending unit).The fuel line attachment port is on the front of the tank (with a tube that reaches to the bottom/center of the tank) and is threaded 1/2 -20. It has a flat seat at the bottom of this threaded hole, not a tapered ...
These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.
This 17 gallon tank for 1941-1948 measures approximately:
91076081Capacity18Overall Length37.000"Overall Width25.000"Overall Height14.000"Sold in QuantityEach
2 Gallon added capacityAll new steel reproduction tanksIncludes: Original-style extra-length mounting straps & hardware, sending unit gasket, and fuel injecion block-off plate & gasketComes with flange for fuel injection pickup or use fuel line outlet for carbAccepts original or other after market sending units from Stewart Warner, VDO, Classic and others
These 15 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.
This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity.
This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a raised fill neck w/ cap, AN-6 fuel pickup, and a rollover vent. Designed to be mounted to the left side which leaves room for your battery. Has a 10.4 gallon capacity.