Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Crane Cams 7501700 1959-74 XRi Ford V8 Points Ignition Conversion Kit

SAME DAY SHIPPING! Order within the next 3 hours 9 minutes and receive same day shipping

Crane Cams 7501700 1959-74 XRi Ford V8 Points Ignition Conversion KitCrane Cams 7501700 1959-74 XRi Ford V8 Points Ignition Conversion KitCrane Cams 7501700 1959-74 XRi Ford V8 Points Ignition Conversion Kit
Crane Cams 7501700 1959-74 XRi Ford V8 Points Ignition Conversion Kit

Click image to enlarge



Speeday Motors Logo
X
Crane Cams 7501700 1959-74 XRi Ford V8 Points Ignition Conversion Kit

Details

Reviews

Q & A

What's in the Box

Here’s the easiest points conversion kit on the market. Simply remove the old points and condenser, install the XR-i on the supplied adapter plate, and run a couple of wires. Everything fits under the OEM distributor cap so you retain a restoration-perfect “factory look.” 

  • Never replace points again
  • Fits 1959-1974 Ford V8
  • Easy two wire hookup
  • Improved starting and mileage
  • Built-in 4000-8000 RPM adjustable rev limiter
  • Picks up timing from distributor cam lobe
  • Fully sealed
  • Operating Voltage:  6-18 Volts, reverse polarity protection, negative ground
  • Current Draw:  3 amps max @ 5,500 RPM
  • RPM Operating Range:  8,000 RPM
  • RPM Limiter Range:  4,000 to 8,000 RPM
  • Primary Voltage Output:  400 volts (inductive discharge)
  • Primary Energy utput:  45 millijoules w/ PS20 coil and 1.65L ballast resistor
  • Peak Spark Gap Current:  50 milliamps w/ PS20 Coil and 1.65L ballast resistor
  • Spark Duration:  2100 microseconds @ 2,000 RPM

Warranties

Crane Cams Warranty

You may also be interested in:

PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
                        

Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

  • Delivers 2x the voltage to the plugs for more power and MPG
  • 2:1 improvement over points in current fall time, increasing coil output
  • Hall Effect Trigger with no moving parts
  • Epoxy molding makes module impervious to contamination
  • Fits entirely inside distributor for a clean, stock look
  • Stable timing - no adjustment needed
  • Will trigger most multi-spark CD ignitions
  • Easy installation

Ignitor Points Eliminator Installation Instructions (PDF)

PerTronix 1281 Ignitor Points Eliminator Kit, 1957-74 Ford V8
                        

Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

  • Delivers 2x the voltage to the plugs for more power and MPG
  • 2:1 improvement over points in current fall time, increasing coil output
  • Hall Effect Trigger with no moving parts
  • Epoxy molding makes module impervious to contamination
  • Fits entirely inside distributor for a clean, stock look
  • Stable timing - no adjustment needed
  • Will trigger most multi-spark CD ignitions
  • Easy installation

447-1281 Instructions (PDF)

Crane Cams 7501710 1957-74 XRi Chevy V8 Points Ignition Conversion Kit
                        Here’s the easiest points conversion kit on the market. Simply remove the old points and condenser, install the XR-i on the supplied adapter plate, and run a couple of wires. Everything fits under the OEM distributor cap so you retain a restoration-perfect “factory look.” 
  • Never replace points again
  • Fits 1957-1974 Chevy V8
  • Easy two wire hookup
  • Improved starting and mileage
  • Built-in 4000-8000 RPM adjustable rev limiter
  • Picks up timing from distributor cam lobe
  • Fully sealed
  • Operating Voltage:  6-18 Volts, reverse polarity protection, negative ground
  • Current Draw:  3 amps max @ 5,500 RPM
  • RPM Operating Range:  8,000 RPM
  • RPM Limiter Range:  4,000 to 8,000 RPM
  • Primary Voltage Output:  400 volts (inductive discharge)
  • Primary Energy utput:  45 millijoules w/ PS20 coil and 1.65L ballast resistor
  • Peak Spark Gap Current:  50 milliamps w/ PS20 Coil and 1.65L ballast resistor
  • Spark Duration:  2100 microseconds @ 2,000 RPM

Instructions (PDF)

Crane Cams 7501720 57-74 Pontiac/67-Up Old XRi Ignition Conversion Kit
                        

Here’s the easiest points conversion kit on the market. Simply remove the old points and condenser, install the XR-i on the supplied adapter plate, and run a couple of wires. Everything fits under the OEM distributor cap so you retain a restoration-perfect “factory look.” 

  • Never replace points again
  • Easy two wire hookup
  • Improved starting and mileage
  • Built-in 4000-8000 RPM adjustable rev limiter
  • Picks up timing from distributor cam lobe
  • Fully sealed
  • Operating Voltage:  6-18 Volts, reverse polarity protection, negative ground
  • Current Draw:  3 amps max @ 5,500 RPM
  • RPM Operating Range:  8,000 RPM
  • RPM Limiter Range:  4,000 to 8,000 RPM
  • Primary Voltage Output:  400 volts (inductive discharge)
  • Primary Energy utput:  45 millijoules w/ PS20 coil and 1.65L ballast resistor
  • Peak Spark Gap Current:  50 milliamps w/ PS20 Coil and 1.65L ballast resistor
  • Spark Duration:  2100 microseconds @ 2,000 RPM
Crane Cams 7501705 1959-74 Ford V8 XRI Points Ignition Conversion Kit
                        

Here’s the easiest points conversion kit on the market. Simply remove the old points and condenser, install the XR-i electronic ignition module on the supplied adapter plate, and run a couple of wires. Everything fits under the OEM distributor cap so you retain a restoration-perfect “factory look.”  

Each kit includes a Crane PS20 1.4 ohm oil-filled ignition coil with black finish.

  • Never replace points again
  • Easy two wire hookup
  • Improved starting and mileage
  • Built-in 4000-8000 RPM adjustable rev limiter
  • Picks up timing from distributor cam lobe
  • Fully sealed
  • Operating Voltage: 6-18 Volts, reverse polarity protection, negative ground
  • Current Draw: 3 amps max @ 5,500 RPM
  • RPM Operating Range: 6,500 RPM
  • RPM Limiter Range: 4,000 to 8,000 RPM
  • Primary Voltage Output: 400 volts (inductive discharge)
  • Primary Energy utput: 45 millijoules w/ PS20 coil and 1.65L ballast resistor
  • Peak Spark Gap Current: 50 milliamps w/ PS20 Coil and 1.65L ballast resistor
  • Spark Duration: 2100 microseconds @ 2,000 RPM
  • Coil Dimensions: 2-1/8" D x 5-3/4" L, 1.75 lbs.
  • Coil Primary Resistance: 1.4 ohms
Crane Cams 7501715 1957-74 Chevy V8 XRI Points Ignition Conversion Kit
                        

Here’s the easiest points conversion kit on the market. Simply remove the old points and condenser, install the XR-i electronic ignition module on the supplied adapter plate, and run a couple of wires. Everything fits under the OEM distributor cap so you retain a restoration-perfect “factory look.”  

Each kit includes a Crane PS20 1.4 ohm oil-filled ignition coil with black finish.

  • Never replace points again
  • Easy two wire hookup
  • Improved starting and mileage
  • Built-in 4000-8000 RPM adjustable rev limiter
  • Picks up timing from distributor cam lobe
  • Fully sealed
  • Operating Voltage: 6-18 Volts, reverse polarity protection, negative ground
  • Current Draw: 3 amps max @ 5,500 RPM
  • RPM Operating Range: 6,500 RPM
  • RPM Limiter Range: 4,000 to 8,000 RPM
  • Primary Voltage Output: 400 volts (inductive discharge)
  • Primary Energy utput: 45 millijoules w/ PS20 coil and 1.65L ballast resistor
  • Peak Spark Gap Current: 50 milliamps w/ PS20 Coil and 1.65L ballast resistor
  • Spark Duration: 2100 microseconds @ 2,000 RPM
  • Coil Dimensions: 2-1/8" D x 5-3/4" L, 1.75 lbs.
  • Coil Primary Resistance: 1.4 ohms
Crane Cams 7501725 57-74 Pontiac/67-Up Old XRI Ignition Conversion Kit
                        

Here’s the easiest points conversion kit on the market. Simply remove the old points and condenser, install the XR-i electronic ignition module on the supplied adapter plate, and run a couple of wires. Everything fits under the OEM distributor cap so you retain a restoration-perfect “factory look.”  

Each kit includes a Crane PS20 1.4 ohm oil-filled ignition coil with black finish.

  • Never replace points again
  • Easy two wire hookup
  • Improved starting and mileage
  • Built-in 4000-8000 RPM adjustable rev limiter
  • Picks up timing from distributor cam lobe
  • Fully sealed
  • Operating Voltage: 6-18 Volts, reverse polarity protection, negative ground
  • Current Draw: 3 amps max @ 5,500 RPM
  • RPM Operating Range: 6,500 RPM
  • RPM Limiter Range: 4,000 to 8,000 RPM
  • Primary Voltage Output: 400 volts (inductive discharge)
  • Primary Energy utput: 45 millijoules w/ PS20 coil and 1.65L ballast resistor
  • Peak Spark Gap Current: 50 milliamps w/ PS20 Coil and 1.65L ballast resistor
  • Spark Duration: 2100 microseconds @ 2,000 RPM
  • Coil Dimensions: 2-1/8" D x 5-3/4" L, 1.75 lbs.
  • Coil Primary Resistance: 1.4 ohms
Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
                        

Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

  • Primary Resistance:  1.4 ohms
  • Secondary Resistance:  5.2 kohms
  • Primary Inductance:  7.5 mH
  • Secondary Inductance:  26H
  • Leakage Inductance:  1.3 mH
  • Turns Ratio:  60:1

Designed for use with XR-i Points Conversion Kits.

Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
                        

Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

  • Primary Resistance:  1.4 ohms
  • Secondary Resistance:  5.2 kohms
  • Primary Inductance:  7.5 mH
  • Secondary Inductance:  26H
  • Leakage Inductance:  1.3 mH
  • Turns Ratio:  60:1

Designed for use with XR-i Points Conversion Kits.