Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
Click image to enlarge
Q & A
What's in the Box
You may also be interested in:
Ford Racing 11 Inch Drum Brake Kit, 2-1/2 OffsetMore Info
Ford 9 Inch Bolt-On Rear Disc Brake KitMore Info
Winters Performance SR2550 SR2980 56 Inch V8 Quickchange, PlainPrice: $2,949.99More Info
Winters Performance Nostalgia V-8 Quickchange, Polished HousingPrice: $3,999.99More Info
Winters 1-3/8 Wide V8, 6 Spline Quick Change Gear Set #1, 24/24 TeethMore Info
Lucas Oil 10122 SAE 75W-140 Synthetic Racing Gear Oil, 1 GallonPrice: $47.99More Info
Lubrication Engineers SAE 140 Weight Gear Oil, 1 GallonPrice: $54.99More Info
We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware.
Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.
- Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
- For Ford passenger car axles ONLY
- Fits axle with maximum flange diameter of 6-1/4" O.D.
- For 15" and larger wheel applications ONLY
NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".
910-31902 Instructions (PDF)
It's been a long time since you could buy a 100% brand new V-8 quick change with the features this one showcases. Each of these assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.
56" wide hub-to-hub. Uses the big Ford bearing (3.150") (Big Ford / New Style ) and has a 2-1/2" axle offset.
THIS ITEM SHIPS TRUCK FREIGHT
Finally an all new V-8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears.
These 6 spline midget gears are CNC machined from SAE 8620 steel. 1-3/8" wide gears.
Quick Change Gear Chart (PDF)
Lucas Oil SAE 75w-140 Synthetic Gear Oil is a non-foaming, super slick, long lasting lubricant designed especially for heavy duty or high performance applications where regular gear lubricants just aren't good enough.
Contains a special additive package that cushions gears and resists "squeezing out" under extreme pressure situations where other gear lubricants just aren't good enough. Specially designed to stand up to high temperatures without losing its lubricity.
Excellent for use in limited slip differentials.
- Heavy duty
- High performance
- Stands up to high performance
- Cools and quiets
Whether you're running a stock flattie and rearend or hopped-up overhead and quick change, you need to run a good gear lube. Remember that your rearend was designed fifty plus years ago and needs all the help it can get. The biggest improvement you can give it is a lubricant that will allow the gears to survive the highway speeds that cars see today. L.E. gear oil is what we use in our 350 mph streamliner, that uses a V-8 quick change, without failure. The "red stuff" provides superior lubrication for long gear life. You can't win if you don't finish. We suggest 90 weight for the street and 140 weight for extreme uses.
- Formulated using blends of high quality paraffinic and synthetic base fluids
- Contains a highly shear stable tackiness
- Unique blend of base fluids and thermally stable EP additives
- Separates readily from water
- Contains non-silicone defoaming additives
- Contains no solids
- Contains DUOLEC LE's proprietary dual acting liquid wear-reducing and extreme pressure additive
LE Gear Oil Data Sheet (PDF)