No items in Shopping Cart
Craning your neck just to be able to see the stoplight change is a pain. Be able to stop at the sensor and still see the light with this cool little gadget. Works excellent, highly recommended if your vehicle makes you stop 30 feet back just to see the light change!
I have a chopped and channeled 33 and it is impossible to see lights when stopped directly below the light. Now, problem solved.
I got this for my dad for his birthday for his street rod. He was always having to lean forward to see the stop light. Now he just looks at the prism! Works great! Thanks Speedway!
Seeing overhead traffic lights got lots easier with this prism. Works great even when you're first in line at the light.
Its fun to have. and it works great!!
Get your questions answered by the community. Ask or answer questions below.
ok i got this but have not figured out where it goes inside towards right maybe half way in middle does the moon shape go up down side ways
Asked on 5/20/2011 3:29:18 PM by traci from pomona park fl
This stop light prism helps eliminate neck strain when trying to see the stop light in some of the hot rods with chopped tops or vehicles with sun visors. It was actually offered as a dealer option on many vehicles of the late 40’s and early 50’s. Normally attaches towards the center of the windshield towards the bottom and the flat part sits flat or facing up as shown in our catalog and on our website. You can bend the wire bracket as needed for proper adjustment which is determined by seating position of the driver and his physical stature. You can rotate it or angle it as needed to get the desired results.
Answered on 6/17/2011 5:59:46 AM by John from Speedway
What are the measurements of this item, and is it made of glass or plastic?
Asked on 6/27/2011 11:54:36 AM by Bob from Malvern PA
Its 2 1/8th wide at the widest point 2 1/2 long suction cup is 7/8 inch across and its made of plastic.
Answered on 6/28/2011 5:30:15 AM by QC from Speedway
Do you have a question about this product?