Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Wilwood Rear E-Brake Kits - Ford 9 Inch Axle

SAME DAY SHIPPING! Order within the next 6 hours 1 minute and receive same day shipping

Wilwood Rear E-Brake Kits - Ford 9 Inch AxleWilwood Rear E-Brake Kits - Ford 9 Inch Axle
Wilwood Rear E-Brake Kits - Ford 9 Inch Axle

Click image to enlarge

Speeday Motors Logo
X
Wilwood Rear E-Brake Kits - Ford 9 Inch Axle

Details

Reviews

Q & A

What's in the Box

Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

  • Rotors are drilled to accept 5 x 4-1/2", 5 x 4-3/4", and 5 x 5" bolt patterns
  • Big 12.19" x .810" one-piece vented rotors
  • Forged billet four-piston calipers
  • BP-10 Smart pads for a quick response and fade resistance
  • Aluminum mounting brackets
  • Includes all hardware

Axle Flange Identification Chart (GIF)

Notes

Note:  Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

Specs

  • Ultralite HP 32 Curved Vane Vented Rotor - 12.19" x .810"
  • Forged billet Dynalite four-piston calipers
    • Piston Area (in²): 3
    • 1/8" NPT inlet
  • Minimum Wheel Diameter (in): 15
  • BP-10 Smart pads
  • Aluminum mounting brackets and hardware
  • Rotors for each kit are drilled to accept 5 x 4-1/2", 5 x 4-3/4", and 5 x 5" bolt patterns

Item Details

Big Ford, old style, 2.36" offset
4-1/2" bolt pattern

You may also be interested in:

Braided Stainless AN 12 Inch Brake Line
                        

Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

AN 3 O.D. is .265 and AN 4 O.D. is .305

Select applicable length. AN size is the "-#" at the end of each part number.

Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
                        

This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
                        

Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

See Application tab for model-specific information.

EC80FU E-Brake Cable Instructions (PDF) 

Connector Cable Installation Instructions (PDF) 

Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
                        AN male all Steel adapters sold in pairs.
                    
Lokar EC-81FU Floor Mount E-Brake Cables for Wilwood & Ford Explorer
                        

Cables are designed for use with Lokar Floor Mount Emergency Hand Brake (at right). Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

See Application tab for model-specific information.

Note: Cable kit includes Explorer-style clevis 491-81FC.

Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
                        

Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

  • Big 12.19" x .810" one-piece vented rotors
  • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
  • Forged billet four-piston calipers
  • BP-10 Smart pads for a quick response and fade resistance
  • Aluminum mounting brackets
  • Includes all hardware

835-1407139 Instructions (PDF)

Axle Flange Identification Chart  (GIF)