Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Wilwood 140-2115B Rear Brake Kit - Old Big Bearing Ford, 2.36 Offset

Price:$557.99
140-2115B - Rear Disc Brake Kit
Price:
$557.99
EA
In Stock
Item #:
8351402115
Item Details:
Big Ford, old style, 2.36" offset
Wilwood 140-2115B Rear Brake Kit - Old Big Bearing Ford, 2.36 Offset
Click image to enlarge Click image to enlarge
No video at this time.
 

Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFord big bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

  • Piston Area (in²): 3
  • 1/8" NPT inlet
  • Minimum Wheel Diameter (in): 15
  • BP-10 Smart pads

These kits do not have emergency brake provisions.

Pro Series Rear Axle Kit Installation Instructions (PDF)

Axle Flange Identification Chart

Exploded Installation Schematic

 

  • 8351402115
    MFG. Part #
    140-2115B
    Bolt Pattern
    Multi: 5 on 5"/4.75"/4.50"
    Rotor Diameter
    12.25
    Rotor Thickness
    0.810"
    Rotor Backspace
    2.360"
    Caliper Pistons
    Four
    Hardware Included
    Yes
    Sold in Quantity
    Each
    Notes
    Includes 2 each calipers, rotor hats, rotors, caliper brackets. Also includes a set of pads and hardware.
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
120-6806 - Wilwood 1.38" Piston - .810" Rotor
Price:
$124.99
EA
In Stock
Item #:
8351206806
You May Also Be Interested In...
  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    (6 Ratings)
    Price: $9.99
    More Info
    Braided Stainless AN 12 Inch Brake Line
    x 
    							                        
    
                                                        
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
                                                 
                                                                                              
                                                     AN 3 O.D. is .265 and AN 4 O.D. is .305
    Select applicable length. AN size is the "-#" at the end of each part number.
  • Removable Brake Line Tabs
    Removable Brake Line Tabs
    (2 Ratings)
    Price: $9.99
    More Info
    Removable Brake Line Tabs
    x 
    							                        
    
                                                        These handy brake line tabs can be bolted or riveted to your frame rather than welded. 5/8" brake line hole with two 3/16" mounting holes. Includes two tabs and two brake line retaining clips. Sold in pairs.
  • Adjustable Proportioning Blocks With Brake Light Switch
    Adjustable Proportioning Blocks With Brake Light Switch
    (6 Ratings)
    Price: $69.99 - $99.99
    More Info
    Adjustable Proportioning Blocks With Brake Light Switch
    x 
    							                        
    
                                                        
    This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.

    The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.

    The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females.  It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes.  It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.

    910-31358 Instructions (PDF)
    Learn more about how adjustable proportioning valves work by reading our tech article. Brake System Selection.  
  • Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
    Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
    (1 Rating)
    Price: $9.99
    More Info
    Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
    x 
    							                        
    
                                                        AN male all Steel adapters sold in pairs.