Wilwood 120-5343 GM III 69-77 Brake Caliper 2.38 In. Piston/.810 Rotor

							                        

                                                        
Wilwood's GM III caliper represents the latest refinements in caliper design and manufacturing through the use of solid modeling and stress simulation programs. The result is the most rigid, highest torque, lightweight aluminum caliper in its class. These tight grained, high density aircraft alloy aluminum castings are fully machined, assembled and tested in-house by fully trained technicians at Wilwood to assure top quality and peak performance. 
1/8 Inch NPT Inlet
Exclusive triple bridge configuration provides increase in clamping force over standard twin bridge calipers 
Material is properly placed to fortify all load bearing points
2.38" diameter piston calipers have a smaller external contour than the larger 2.75" diameter piston calipers 
Stainless steel pistons for increased fluid protection 
High temperature seals for controlled retraction which provides improved driver feel
Wilwood Specs Sheet (Link)
Wilwood Data Sheet (PDF) 
                                                    

						                        

							                        

                                                        The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine). 
                                                    
						                        

							                        

                                                        
Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
                                             
                                                                                          
                                                 AN 3 O.D. is .265 and AN 4 O.D. is .305
Select applicable length. AN size is the "-#" at the end of each part number.
                                                    

						                        

							                        

                                                        
Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”
Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Motorsports severe-duty friction technology.
Higher coefficient of friction over stock brake pads
Provides 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads
Less fade means a highly durable brake pad with less brake dust
Upgrade your 1969-77 GM Midsize braking system with these premium pads. Sold as a set of 4, 1 set will be needed to outfit 2 calipers.
Brake Pad Brand Guide (Link)  
 
                                                    

						                        

							                        

                                                        AN male all Steel adapters sold in pairs.
                                                    
						                        

							                        

                                                        
Wilwood's GM III caliper represents the latest refinements in caliper design and manufacturing through the use of solid modeling and stress simulation programs. The result is the most rigid, highest torque, lightweight aluminum caliper in its class. 
These tight grained, high density aircraft alloy aluminum castings are fully machined, assembled and tested in-house by fully trained technicians at Wilwood to assure top quality and peak performance. 
Exclusive triple bridge configuration provides increase in clamping force over standard twin bridge calipers 
Material is properly placed to fortify all load bearing points
2.38" diameter piston calipers have a smaller external contour than the larger 2.75" diameter piston calipers 
Stainless steel pistons for increased fluid protection 
High temperature seals for controlled retraction which provides improved driver feel
1/8 Inch NPT Inlet
Wilwood Specs Sheet (Link)
Wilwood Data Sheet (PDF) 
                                                    

						                        

							                        

                                                        
Wilwood's GM III caliper represents the latest refinements in caliper design and manufacturing through the use of solid modeling and stress simulation programs. The result is the most rigid, highest torque, lightweight aluminum caliper in its class. 
These tight grained, high density aircraft alloy aluminum castings are fully machined, assembled and tested in-house by fully trained technicians at Wilwood to assure top quality and peak performance. 
Exclusive triple bridge configuration provides increase in clamping force over standard twin bridge calipers 
Material is properly placed to fortify all load bearing points
2.38" diameter piston calipers have a smaller external contour than the larger 2.75" diameter piston calipers 
Stainless steel pistons for increased fluid protection 
High temperature seals for controlled retraction which provides improved driver feel
1/8 Inch NPT Inlet
Wilwood Specs Sheet (Link)
Wilwood Data Sheet (PDF)