Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Garage Sale - Walker Cobra 1934 Street Beast Radiator w/ A/C Condenser

Free Shipping Free Shipping
Specs
Tube Style:
Downflow
Sold in Quantity:
Each
Inlet Location:
Centered
Material Type:
Copper
Finish:
Painted
Row Quantity:
3
Outlet Location:
Lower Right
Color:
Black
Radiator Style:
Single Pass
Transmission Cooler:
Yes
Shroud:
No
Garage Sale:
Yes
Overall Height:
27.38
Overall Width:
17.38
Overall Thickness:
7.38
Inlet Size:
1.50
Core Height:
20.38
Core Width:
17.00
Core Thickness:
2.00
Filler Neck Height:
2.38
Notes
1/8" NPT fittings for transmission cooler. 1/4" NPT fitting for drain. 1.68" wide mounting feet on both sides. 5/8"-18 and 3/4"-16 inverted flare fittings for A/C.
Garage Sale - Walker Cobra 1934 Street Beast Radiator w/ A/C Condenser
Garage Sale - Walker Cobra 1934 Street Beast Radiator w/ A/C Condenser
Garage Sale - Walker Cobra 1934 Street Beast Radiator w/ A/C Condenser
Garage Sale - Walker Cobra 1934 Street Beast Radiator w/ A/C Condenser

Click image to enlarge

Please NOTE the following about this product:

  • This product is discontinued.

Details

Reviews

Q & A

What's in the Box

Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit into your '34 Street Beast Coupe or Cabriolet grille shell and includes heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions.

  • Copper core w/ 1-piece brass tanks
  • Vertical tubes every 1/4" and 17 fins per inch of height
  • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
  • Use a 15-18 lb. radiator cap
  • Brass drain cock
  • Simple bolt-in install

Ford Chassis W/ Chevy Engine Application Chart (GIF)

 

Clearance!

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

Warranties

Walker is now extending their warranty on all Cobra Series radiators to a full ten years, affecting all Cobra Series units manufactured after January 1, 2007.

Customer Reviews

This product has no reviews.

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Walker Z-Ac505-1 Z-Series 1936 Chevrolet Radiator w/ A/C Condenser
(Part #820ZAC5051)
                        

Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

  • Works with original, reproduction steel, or fiberglass grille shells
  • Copper core w/ 1-piece brass tanks
  • Vertical tubes every 1/4" and 12 fins per inch of height
  • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
  • Use a 15-18 lb. radiator cap
  • Brass drain cock
  • Simple bolt-in install

Chevy Chassis W/ Chevy Engine Application Chart (GIF)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

Item Details

With A/C Condenser
Condenser Fittings: #6 and #8 O-ring design
Condenser Refrigerant: R-12 or R-134a
Use Walker Fan Shroud Style B
Walker WS40 Radiator Fan Shroud, Style A, 20 x 21 Inch
(Part #82040)
                        

Maximize your radiators effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

See Application tab for application information.

Fan Shroud Size Chart (GIF)

Item Details

20" x 21"
Walker C-498-1 CMC Cobra 1934 Street Beast Radiator
(Part #820C4983)
                        

Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit into your '34 Street Beast Coupe or Cabriolet grille shell and includes heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions.

  • Copper core w/ 1-piece brass tanks
  • Vertical tubes every 1/4" and 17 fins per inch of height
  • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
  • Use a 15-18 lb. radiator cap
  • Brass drain cock
  • Simple bolt-in install

Ford Chassis W/ Chevy Engine Application Chart (GIF)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

Round Chrome Radiator Pressure Cap, 15 Lbs
(Part #91015602)
                        

Pressure caps for radiators featuring 15-pound capacity. Chrome finish.

  • 2-3/8" O.D. of cap top
  • 2-1/4" I.D. of cap top
  • Will fit a standard radiator neck
  • Sealing surface (which sits inside the neck) is 1-1/2" O.D.
  • Cap sides are 7/16" tall

Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

SPAL Curved Blade Fans
(Part #910153)
                        

These SPAL fans feature curved blades which are much quieter than straight bladed fans. Pull type only. Available in 14" or 16" diameter.

No mounting hardware is include. You may wish to order 910-64065.

910-153 Instructions (PDF)

Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

Cooling Components CCI-1740 Cooling Machine Electric Fan, Style 40
(Part #91015642)
                        At one time or another we all have had a car overheat. The Ultimate Cooling Machine fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
  • 24.44" wide x 19" high
  • Can be easily reduced in size to 21-5/8" wide x 17-1/4" high
  • 12 volt operation
  • Lower engine operating temperatures
  • Saves horsepower
  • Better fuel mileage
  • Constructed of high-impact ABS material
  • Requires the use of a 70 amp or larger fan relay
  • Relay and fan control sold seperately.

Fan Vehicle Application Chart (GIF)

Learn more about the importance of using a fan shroud in our tech article, Fan Shrouds - A Critical Cooling System Component.