McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Speedway Bench Vise Soft Aluminum Fitting Jaws

Specs
Material Type:
Aluminum
Overall Height:
1.625
Overall Width:
1.125
Overall Length:
4.000
Sold in Quantity:
Pair
Finish:
Natural
Notes
Mounting step measures: 4" x .5" x 1.625". Includes magnet to affix it to steel vise jaws.
Speedway Bench Vise Soft Aluminum Fitting Jaws
Speedway Bench Vise Soft Aluminum Fitting Jaws
Speedway Bench Vise Soft Aluminum Fitting Jaws

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

These soft-jaw vice inserts will keep your AN fittings looking great during and after assembly. The aluminum insert firmly holds the hex portion of the fitting without marring the anodized or plated finish. They can be used with any size AN fittings from AN3 to AN32.

As a bonus, the long horizontal pockets in the inserts will hold braided hose while cutting. Includes magnet to affix it to steel vice jaws.

Customer Reviews

Rated 5 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Hotrod Hirning
Verified Purchaser
Laurel, MT
Product Rating

Soft jaw vise insert

February 06, 2011
You need vise jaws to go with working on -AN fittings. A great tool!
Pros:
  • Powerful
  • Versatile
  • Durable
  • Good Grip
  • Lightweight
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

40 ford
livermore Ca
Product Rating

Does the job well

May 16, 2010
This also holds the braided line as well as the AN fittings. Does a good job.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

What size an fittings is good for.

1 answers
July 18, 2011

What size an fittings is good for.

Answers

July 19, 2011
Jason
This will work with AN 3 to AN 32
Page 1 of 1

You may also be interested in:

Speedway Bench Vise AN Fitting Holding Fixture
(Part #91089830)
                        You spend a lot of money for your AN fittings only to clamp them in the vise while putting them together. This tears up the anodized coating which can make the fitting corrode.

This handy holding fixture allows you to clamp the fitting securely in a vise, but not tear it up. Made of high-impact plastic. For AN-3 to AN-20.

Performance Tool W3939 Small 2-1/2 Inch Drill Press Vice
(Part #91081030)
                        

Handy tool for when using the drill press. Has 2-1/2" wide jaws. Jaws spread apart 2-5/16" when completely extended.

  • Slot design mounting holes
  • Etched jaws for preventing slipping
  • Pivot handle for easier turning
Speedway Bench Vise Magnetized Soft Aluminum Fitting Jaws
(Part #57315199)
                        These soft-jaw vise inserts will keep your AN  fittings looking great during and after assembly. The aluminum insert  firmly holds the hex portion of the fitting without marring the anodized  or plated finish. They can be used with any size AN fittings from AN3  to AN32.

As a bonus, the long horizontal pockets in the inserts will hold braided hose while cutting. Includes magnet to affix it to steel vise jaws.
Titan Tools 22019 4 Inch 2-Piece Soft Jaw Pads
(Part #72822019)
                        

These 4" soft jaw vice pads from Titan Tools are sold in pairs and are designed to be used with your bench vice. They are designed with a grooved surface which allows it to hold round stock, tubing, and rods.

  • Fastens to vise jaws with 3 strong magnets
  • Non-Marring material prevents clamp marks, scratching, and other damage to finished surfaces
  • Sold in pairs


Titan Tools 22020 6 Inch 2-Piece Soft Jaw Pads
(Part #72822020)
                        

These 6" soft jaw pads from Titan Tools are sold in pairs and are designed to be used with your bench vice. These pads have a grooved surface, which assists in holding round stock, tubing, and rods.

  • Fastens to vise jaws with 3 strong magnets
  • Non-Marring material prevents clamp marks and scratching from damaging finished surfaces
  • For use with a 3-6 inch vise