Valve Cover Breather Filter - 1 3/8 Inches
Click image to enlarge
Q & A
What's in the Box
Valve Cover Breather Filter, 1 3/8"
Clamp-on style valve cover breathers. Washable.
- less money
- TOP Quality
No questions have been asked.
You may also be interested in:
Push-In Valve Cover Breather KitMore Info
Valve Cover Shielded Breather, 1-3/8 InchMore Info
Weld-In Steel Valve Cover Breather Set, 1-3/8 Inch TubeMore Info
R2C Engine Breather Filter, 1-3/8 InchPrice: $23.99More Info
Outerwears Black Valve Cover Breather Pre-FilterMore Info
Push-in rubber system. Two K&N style filters and breather adaptors. Fits steel or aluminum valve cover with 1.22" breather hole.
Valve cover breathers feature a clamp-on shielded design. Washable & reuseable.
- Clamps to a 1-3/8" O.D. tube
- Overall height of the breather and base is 3-1/8”
- Overall diameter of breather without shield is 2-7/8”
- Overall diameter of breather with shield is 3-1/4”
Steel baffled weld-in adapters. Includes two clamp-on washable & reuseable shielded filters with breather adapters. The O.D. on the tubes is 1-3/8".
R2C premium breather filters are designed to offer racers the finest crankcase and tank breather technology available today. R2C's flange design improves oil return and significantly reduces the dripping caused by oil collected at the lower flange associated with competitors breather fllters. R2C breather construction also ends the problems associated with cap failures. HD screens eliminate crushed breathers. R2C breathers are fully washable using biodegradable solvents.
Available in carbon fiber or red, blue and black anodized aluminum cap finishes.
Carbon Fiber breathers are clearance priced.
Made from a durable polyspun material containing uniform micron openings.
Keep the bigger and most damaging particles of sand, dirt, clay and oil drips from getting to and clogging the fins of your valve cover breather filter.
Available in several colors: red, orange, yellow, blue, pink, purple and black.
- Base Diameter: 3"
- Top Diameter: 3"
- Height: 2-1/2"