Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Universal Quick Change Look Rear End Cover, Raw


Share by Email


Click image to enlarge




Q & A

What's in the Box

The great look of a 'Quick Change' rear end at a fraction of the price. Universal style that can be trimmed to fit any rear axle.

916-47903 Instructions (pdf)


You may also be interested in:

Universal Lowering Block Kit, 1 Inch

Kit includes 2 extruded aluminum lowering blocks complete with four 1/2" U-bolts and hardware. Blocks are 2-1/2" wide x 5" long. U-bolts fit 3" diameter axle housings and are 10" long. 

910-43808 Instructions (PDF)

Lubrication Engineers SAE 140 Weight Gear Oil, 1 Gallon

Whether you're running a stock flattie and rearend or hopped-up overhead and quick change, you need to run a good gear lube. Remember that your rearend was designed fifty plus years ago and needs all the help it can get. The biggest improvement you can give it is a lubricant that will allow the gears to survive the highway speeds that cars see today. L.E. gear oil is what we use in our 350 mph streamliner, that uses a V-8 quick change, without failure. The "red stuff" provides superior lubrication for long gear life. You can't win if you don't finish. We suggest 90 weight for the street and 140 weight for extreme uses.

  • Formulated using blends of high quality paraffinic and synthetic base fluids
  • Contains a highly shear stable tackiness
  • Unique blend of base fluids and thermally stable EP additives
  • Separates readily from water
  • Contains non-silicone defoaming additives
  • Contains no solids
  • Contains DUOLEC LE's proprietary dual acting liquid wear-reducing and extreme pressure additive

LE Gear Oil Data Sheet (PDF)

Rear Axle Breather

This rear axle breather will stop lube from being flung out of rear axle housing. Allows "breathing" of rear axle assembly. 7/16"-20 thread. Polished!

Install with thread sealant or Teflon tape. Can be used on various applications with appropriate plumbing components.

Leaf Spring Pinion Angle Shims
                        These aluminum leaf spring shims allow you to correct your pinion angle. Availalbe in 2° and 4° angles. Fits 2-1/2" wide springs.
Universal Quick Change Look Rear End Cover, Polished

The great look of a 'Quick Change' rear end at a fraction of the price. Universal style that can be trimmed to fit any rear axle.

Quick Change Rearend Cover Installation Instructions (pdf)


Garage Sale - Halibrand V8 Quick Change Rear Cover Plate, Polished
                        We found a limited supply of these rare Halibrand V8 quick change parts. These are designed for 91647902 and 91647904. Not machined to fit bearings

Click to See Application Chart (Link)


This is garage sale priced because it has been discontinued.