Products to Compare (max of 3)
X
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
Shop By
Support
Account

Universal Master Cylinder Pushrod, 5-5/8 Sleeve, 3/8 Heim

Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Zinc
Thread Pitch:
3/8"-24
Inside Diameter:
.38
Notes
Overall length is adjustable from 6-3/4" to 7-1/2".
Universal Master Cylinder Pushrod, 5-5/8 Sleeve, 3/8 Heim
Universal Master Cylinder Pushrod, 5-5/8 Sleeve, 3/8 Heim
Universal Master Cylinder Pushrod, 5-5/8 Sleeve, 3/8 Heim

Click image to enlarge

Details

Reviews (7)

Q & A (1)

What's in the Box

Info

You know there are times you need one of these, even if you dont know what to call it. The 5-5/8" long sleeve (.63" O.D.) and has 3/8"-24 RH female threads on both ends, approximately 1.5" deep, and includes a 3/8" heim with 3/8" diameter hole. Overall length is adjustable from 6-3/4" to 7-1/2".

Item Details

5-5/8" long sleeve - includes 3/8" heim

Customer Reviews

Rated 4 out of 5 by 7 reviewers.
RATING BREAKDOWN
7 reviews
5 Stars
2
4 Stars
3
3 Stars
2
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Lugnutz
Verified Purchaser
Verified Reviewer
Columbia, SC

Made with precision and should be just what I need.

September 05, 2016
Does the job. Extends the brake booster push rod and well made. Would be nice if 2 jam nuts were included.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Lugnutz
Verified Purchaser
Verified Reviewer
Columbia, SC

Jam Nuts

September 05, 2016
These jam nuts were just what I needed for a brake push rod extension (part 91031524).
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Patriot Cycle & Customs
Verified Purchaser
Verified Reviewer
west Detroit

Good product

June 07, 2016
Nice universal piece. Cut to length and screw together as needed. Very happy with this.
Pros:
  • Very Universal Design
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

jeepfixer
Verified Purchaser
Arizona

Bigger than dimensions given

August 18, 2012
Did a brake upgrade and needed shorter shaft. Measured from center of mount hole to end of shaft and at the time, description showed OAL to be same as what I needed. Got the product and OAL was longer. Also the diameter of shaft was way too big to fit into my master cylinder. Had to send it back. Now it seems the OAL dim mentions the sleeve but doen't include the distance to the center of the hole. Someone should update the info, including the shaft dia. - how are we to tell if it will fit. Too bad... as this is a well made item. Also the front 'sleeve' is threaded and can be adjusted longer than shown in the picture - they didn't mention that either.
Pros:
  • Heavy Duty- Well Made
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Thanks for your feedback! We sincerely apologize for the inconvenience. The mounted length for this pushrod is adjustable from 6-3/4" to 7-1/2". The sleeve has an O.D. of .63".
eyy128c
Verified Purchaser
Oneonta NY

Custom pushrod

March 13, 2012
I used it I did modifie, it to make a custom clutch master cylinder pushrod, but it worked well the swivel end has a beautiful finish and fit nicely, the grease fitting was very small.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Snap Rat
Verified Purchaser
West Virgina

Rat Rod Brakes

September 11, 2011
I am happy with the product -Had to modify it by cutting it . Works very well in my Rat Rod.
Pros:
  • No Fade
  • Lightweight
  • Decreased Stopping Distance
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

keifer
Verified Purchaser
duncan ok

just what it says

June 06, 2011
had to cut it down and drill and make new threads. it was too long. but that is normal for fabricating these old cars
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

My original master cylinder push rod is of a chevy and it has a ball shape at the end of the shank.i see this product doesnt have that is that going to cause a probem?

Mellow
Corona Ca,
November 15, 2011

My original master cylinder push rod is of a chevy and it has a ball shape at the end of the shank.i see this product doesnt have that is that going to cause a probem?

Answers

November 16, 2011
John
Part # 91031524 The end of the push rod will go into the bore of the master cylinder piston and should not create an issue not having the ball on the end. We do offer a push rod kit that comes with several variations under part number 91001726 if this would be of interest. The Heim could be ordered in addition if needed.
Page 1 of 1

You may also be interested in:

  • Wilwood 33013914 Universal Push-Rod Kit
    Wilwood 33013914 Universal Push-Rod Kit
    View
    (0)
    $59.99
    Compare
Suggestions