Universal Master Cylinder Pushrod, 4-3/4 Inch Long
Click image to enlarge
Q & A
What's in the Box
You may also be interested in:
Universal Master Cylinder Pushrod, 8-5/8 LongMore Info
Universal Master Cylinder Pushrod, 5-5/8 Sleeve, 3/8 HeimMore Info
SSBC A1726 Universal Adjustable Master Cylinder Pushrod KitMore Info
3/8 Inch ClevisMore Info
Replacement Pushrod for Manual Master CylinderMore Info
You know there are times you need one of these, even if you don't know what to call it. All have 3/8"-24 RH threads. 6 Inch Long Hex, 8 5/8" overall.
You know there are times you need one of these, even if you don't know what to call it. The 5-5/8" long sleeve (.63" O.D.) has 3/8"-24 RH internal threads and includes a 3/8" heim with 3/8" diameter hole. Overall length is adjustable from 6-3/4" to 7-1/2".
Pushrod kit includes adapters for 10 common push rod configurations. Accommodates eyelet, clevis and bell crank style pushrod setups. Works with both power and non-power brake systems.
- 3/8" threaded coupler, female threads RH on both ends, 1-1/8" long, 1/2" hex
- Manual adjuster, M/C pushrod, 3-3/8" overall length, 7/8" of male 3/8" threads
- Eye ring assembly is 3" overall length
- 2.64" end of 3/8" female threads to center of eye
- Dia. of eye is 0.640" and includes plastic insert halves for both sides (0.550" ID)
This is a neat clevis with many potential uses, including connecting a master cylinder or booster pushrod to your brake pedal arm. Overall length is 2”, and it’s tapped for 3/8” fine thread. Comes with a 3/8" diameter clevis pin and cotter key.
This replacement pushrod for manual master cylinders fits our Dual Feed Master Cylinder 910-31420.
- Overall Length: 6"
- Threaded Length: 5-3/8"
- Threads: 3/8" Fine
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.