Call: 800.979.0122
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Universal LED Indicator Light Bulbs, 5/32 Inch

SAME DAY SHIPPING! Order within the next 15 hours 56 minutes and receive same day shipping

Specs
Overall Length:
5.50
Sold in Quantity:
Each
Body Diameter:
.17
Universal LED Indicator Light Bulbs, 5/32 Inch

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and does not require a resistor.

Available in amber, green and red colors.

Customer Reviews

Rated 3.6 out of 5 by 14 reviewers.
RATING BREAKDOWN
14 reviews
5 Stars
8
4 Stars
1
3 Stars
0
2 Stars
2
1 Star
3
RECOMMEND THIS PRODUCT:

Runnin-Iron
Verified Purchaser
Verified Reviewer
Mena, AR

A little on the light side

June 13, 2015
These indicator lights are great for hi-beam and turn signal lights, however the slightest amount of pressure on the wires will pull them out of the light socket and they cannot be re-attached. I found (after breaking the first one trying to install it) that using a small amount of petroleum jelly on the light base makes it much easier to slide into the rubber socket in the billet dash panel. This caution should be given in the installation directions. The end result was that I had to re-order another light and delay finishing my project ubtil the new replacement was sent.
Pros:
  • nice bright light
Cons:
  • Wires Too Flimsy
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Runnin-Iron
Verified Purchaser
Verified Reviewer
Mena, AR

Use care in installing!

May 30, 2015
These are very nice lights and work well for turn signal and hi-beam indicators. The wires are extremely fragile and can't be pulled on at all! The directions should advise using petroleum jelly (Vaseline) on the bulb housing prior to installation to aid in slipping into mounting hole. Do that and they slip right in.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Hdrk95
Verified Purchaser

LED Lights

October 20, 2014
Just what I needed to replace the burned out turn signal indicators I had. Nice and bright and easy to install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

rightwayricky
Verified Purchaser
Richmond, VA, USA

LED mini lights

September 01, 2014
these mini lights work great in my dash for turn indicators, computer, and high beam indicator.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Positive
Verified Purchaser
The D - Michigan

Cheap product

August 25, 2014
Of the 6 LEDS that I ordered, one didn't work, another was off center in the holder and another sank into the holder when pushed into the hole. Additionally, the wires are so small they are very difficult to work with. My smallest stripper is 24ga and the wire falls right through it. Also, the strands of wire are like hair and EASILY cut. I intended to use these in a instrument cluster in a customer's car but removed them for another brand of LED that was 3x more expensive. That said, Speedway did me a solid and refunded my money very promptly. My business is prototype wiring harnesses and custom wiring fabrication for hot rods, race cars, customs and the like. In business for over 30 years. I'm surprised that Speedway didn't recognize these LEDs as inferior products and don't meet their usual high standards.
Cons:
  • CHEAP
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

LEE62
Verified Purchaser

PERFECT

August 20, 2014
perfect part / the service and shipping second to none. prices across the parts that we have bought seem very good. thanks again for the service Lee
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

stringbean
Benton, AR, USA

steve40

July 04, 2013
I had one of my led lites delivered broken and I called Speedway motors and they sent me a new one and told me to chunk the broken one. Not worth time,postage etc. Smart move. The other lights were used for high beam and turne signal. They work to good very,very,very bright. Had to use finger nail polish to dull the brightness. Like to do buisness with Speedway F. Todd
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

steve40
Centerville, IA 52544, USA

great light

March 25, 2013
had these led before and they work- if you get them not broken! they put them in a bag with 8 - 3/4" hiem ends. called and told them and they're responce was "they have no control over packing and shipping. would get refund of $3.99 after i payed to ship it back." don't order with heavy parts.
Pros:
  • Works Great
Cons:
  • arrived broken and had to pay for another + ship
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Steve40, thank you for your feedback! Speedway Customer Service has issued you a refund for the broken lights. We apologize for any inconvenience due to our mistakes within order transactions. We should not have sold a replacement and billed for the shipping. We should have simply sent a replacement at no cost due to the issue at hand and the cost of the part involved. This issue has been corrected and again, we thank you for your purchase and understanding. If any other questions or comments happen to arise, please do not hesitate to contact us. We are happy to help our customers and to make sure they have the best experience with us in any way.
RFord
Verified Purchaser
Greenville, SC

Worked great. Very good product.

July 28, 2012
Installed them in a 6 volt system and they worked great.
Pros:
  • Reliable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Tom
Verified Purchaser
Pottstown,Pa

I would buy this product and others

July 29, 2011
Using these LED lights for turn signals and high/low beam indicators. Found they work very well for what I intended.
Pros:
  • Can Withstand Use
  • Reliable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 4 answers

1 answers

what best size bit to use with 5/32 fiberglass dash on Harley? Thanks

Marv
Washington, USA
March 30, 2014

what best size bit to use with 5/32 fiberglass dash on Harley? Thanks

Answers

March 31, 2014
EricM
A 5/32" drill bit should be used to make a hole for these lights.
1 answers

I have the billet 34 dash panel. What is the part number I need for the led dash lights?

August 23, 2011

I have the billet 34 dash panel. What is the part number I need for the led dash lights?

Answers

August 23, 2011
John
This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. From this information the 5/32 lights would be the correct fit.
2 answers

Do these LED Indicator Bulbs require resistors to work properly or is it a direct connection to 12V?

January 22, 2012

Do these LED Indicator Bulbs require resistors to work properly or is it a direct connection to 12V?

Answers

September 08, 2014
TT30
I used a speedway wiring harness in my mod. A and wired them direct to the wires provided for the turn signal indicator left and right and also high beam indicator light.
January 24, 2012
John
These lights are direct hook up for 6-12 volt and do NOT require a resistor.
Page 1 of 1

You may also be interested in:

Universal LED Indicator Light Bulbs, 1/4 Inch
(Part #91131052)
                        

You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and does not require a resistor.

Available in amber, green and red colors.

Universal LED Indicator Light Bulbs, 5/16 Inch
(Part #91131054)
                        

You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and does not require a resistor.

Available in amber, blue, green, and red colors.

Universal LED Indicator Light Bulbs, 1/2 Inch
(Part #91131059)
                        

You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation. Direct hook up for 6-12 volts and does not require a resistor.

Available in amber, green, blue, white, and red colors.