Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Univeral Seat Frame Only

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Painted
Garage Sale:
No
Centerline of Holes:
14.25
Overall Height:
5.00
Overall Width:
19.00
Overall Length:
15.13
Centerline of Holes (Alternate):
18.00
Notes
14.25" x 18.00" bolt hole pattern for the floor.
Univeral Seat Frame Only
Univeral Seat Frame Only
Univeral Seat Frame Only
Univeral Seat Frame Only

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These universal seat mounting frames will allow you to install bucket seats almost any car. Purchase either the complete assembly with sliders and mounting plates (910-70024) or individual parts as needed.

Since every application is different, some modification may be required.

910-70025 Instructions (PDF)

 

Notes

  • Upper mounting holes are 11" center to center front to rear and 12" center to center side to side
  • Floor mount holes are 14-1/4" side to side and 18" front to rear, both are center to center of holes in frame

Customer Reviews

Rated 4.8 out of 5 by 18 reviewers.
RATING BREAKDOWN
18 reviews
5 Stars
15
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

69z
Verified Purchaser
Verified Reviewer
LaGrange,Ohio

Great Product

December 20, 2015
Worked great for the seat tracks and seats that I'm using. One must be sure that it is the right height for their application. I would recommend this product to anyone looking for a reasonable priced seat frame!!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

mr. D
Verified Purchaser
West Jordan, utah

great construction

October 21, 2015
bolting them to some vintage corvette seats in my 55 chevy gasser
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

mr. D
Verified Purchaser
Verified Reviewer
West Jordan, utah

perfect for my 55 gasser seats

October 17, 2015
I am using these for my 55 gasser. 60's corvette bucket seats
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

pizon
Verified Purchaser
Verified Reviewer
maine

universal seat frame

August 20, 2015
I used this frame not to mount in a car but for sim racing worked great for me.
Pros:
  • Worked Out Great For Me
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

'39 Gasser
Verified Purchaser
Oak Harbor, WA

Perfect for a tight fit

August 15, 2015
Great for cars that are limited on interior space. Just wish it had a little more universal to the seat spectrum. But with everything there is some modifications needed to get that perfect fit.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Alninocala
Verified Purchaser
Ocala, Florida

Great product...can be modified!!!

March 31, 2015
I was replacing a bench seat in a 1977 Ford Maverick 2 door with bucket seats from 1968 Mustang. Original seat sliders for Mavericks are not to be found! I bought two of these universal seat mounts. I cut off the mounting tabs and then started cutting down the round tube steel until they were at the position that I felt were a nice fit. Re-welded the mounting tabs back on...then installed them after purchasing the sliders and mounting plates that Speedway Motors also sells. Overall very happy with the way they turned out.
Pros:
  • can be modified and re-welded
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

grumpysgt
Verified Purchaser

worked very well for what I needed

March 26, 2015
used to mount seat in my hotrod, needed to make a plate to get holes to line up, but was simple and worked very well.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Racedude4141
Verified Purchaser

SEat Frame

February 17, 2015
Worked perfectly for what i needed. Well made. fit in floor board nicely.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

racingrufus49
Verified Purchaser
Fultondale, AL, USA

Sturdy mount for seats

September 13, 2014
These are great for a flat floor. I used these in a 1955 Ford F100. No fab work, just drilled holes in floor.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

rocket72
Verified Purchaser

Great item

August 03, 2014
Makes custom mounting much easier. Went into a custom van.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 3 answers

1 answers

What is the height of this seat frame?

June 05, 2012

What is the height of this seat frame?

Answers

June 05, 2012
Jason
This frame is 5" tall in rear and 5-1/2" tall in front
1 answers

WHAT IS THE CENTER TO CENTER MEASUREMENT OF THE LEFT AND RIGHT REAR HOLES? WHAT IS THE CENTER TO CENTER MEASUREMENT OF A REAR HOLE TO A FRONT HOLE? THANK YOU

350Z DRIFT
NAZARETH
July 01, 2011

WHAT IS THE CENTER TO CENTER MEASUREMENT OF THE LEFT AND RIGHT REAR HOLES? WHAT IS THE CENTER TO CENTER MEASUREMENT OF A REAR HOLE TO A FRONT HOLE? THANK YOU

Answers

July 05, 2011
Jason
Center to center is 18" by 14-1/4" on foot holes. Center to center on base is 12" x 11"
1 answers

HOW HIGHT ARE THERE TOP TO BOTTOM HOW MUCH IS SHIPPING TO MICH. 48092

MGE6060
October 01, 2012

HOW HIGHT ARE THERE TOP TO BOTTOM HOW MUCH IS SHIPPING TO MICH. 48092

Answers

October 02, 2012
Jason
This frame is 5" tall in rear and 5-1/2" tall in front
Page 1 of 1

You may also be interested in:

Universal Seat Mounting Frame, Slider and Mounts
(Part #91070024)
                        

These universal seat components will allow you to install bucket seats in any car. Since every application is different, some modification may be required. 

  • 7" overall assembled height
  • 15-1/2" wide
  • 17-1/2" long
  • 7” front-to-rear adjustment

NOTE: Kit mounts 1 seat. If mounting 2 bucket seats or 1 bench seat, 2 kits would be required.

910-70024 Instructions (PDF)

Universal Seat Sliders
(Part #91070026)
                        

These universal seat sliders allow you to easily adjust the bucket seats in your car. Since every application is different, some modification may be required.

Directly fits Speedway seat frame and mounting plates (also available as a complete kit).

910-70026 Instructions (PDF)

Universal Seat Mount Plates
(Part #91070027)
                        These universal seat mount plates will allow you to install almost any bucket seat in your car. Purchase either the complete assembly (910-70024) or these individual plates as needed. Since every application is different, some modification may be required. 

910-70027 Instructions (PDF)