AFCO 1/8 NP to 3 AN Fitting
Click image to enlarge
Q & A
What's in the Box
Brake system fittings to complete your brake plumbing project.
Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.
Item DetailsApplication: WW & JFZ Aluminum Calipers
You may also be interested in:
Wilwood 220-0063 Bleeder Screw Assembly, Single$3.99More Info
Straight -4 AN Male to 1/8 Inch NPT Male Adapter FittingMore Info
Goodridge 775-44P Steel 7/16 Inch x 24 Brake Banjo BoltMore Info
Straight 3/8 Inch-24 IFF to AN 4 Male AdaptersMore Info
7/16 Inch to AN3 Banjo FittingMore Info
Straight -3 AN Male to 1/8 NPT Male Adapter FittingMore Info
3/8 Inch-24 IFF Each End, 1/8 Inch NPT Female Center, Brass Adapter TeeMore Info
Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male AdapterMore Info
This bleeder repair kit allows you to repair and salvage those calipers that have a damaged bleeder. Simply drill and tap the caliper to 1/8" pipe thread and install this replacement bleeder assembly.
Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines.
Straight AN to NPT adapters.
These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.
Brake Banjo Bolt
- 7/16 Inch x 24
- For use with banjo fittings
- Overall Length : 1.04 "
- Under Head Length : .86 "
- Thread Length : .55 "
- Thread Pitch : 7/16-24
- Wrench Type : Hex
- Material Type : Steel
- Finish : Zinc
Note: To measure what size fitting you have, you will need to measure the outside diameter of the threads and check the tread pitch. To check for thread pitch you will need to count the number of threads you have in 1". It is easier if you have a thread pitch gauge which should be available at your local hardware/bolt supply store. This particular fitting measures 7/16" thread outside diameter and has 24 Threads Per Inch (TPI).
AN male all Steel adapters sold in pairs.
7/16 Inch to AN3 Banjo Fitting
- 1/8" NPT
IFF TEE male and female adapters
Straight 3/8"-24 IFF to 1/8" NPT Male Adapter