This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.
US Brake Master Cylinders
Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.Brake System Builder Tip (GIF) Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.
Brake System Builder Tip (GIF)
Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
Highly visible bright blue knob has a special bi-directional detente control which provides the driver with positive adjustment feedback. 5' long, may be shortened. For use with Wilwood aluminum brake pedal assemblies.
This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The floor mount pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.
910-29976 Instructions (PDF)
910-29976 Specs Sheet
If you are using a parts store brake fluid, you are not getting the most from your brake system. AFCO Ultra HTX racing brake fluid is specifically formulated for racing under the most demanding conditions. Ultra HTX's high wet and dry boiling points give you maximum protection against vapor lock and other problems associated with high brake system temperatures. With a 600+ degree boiling point, Ultra HTX high temp brake fluid sets a new standard for brake fluid performance.