Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Three 4-bolt Small Rochester 2-BBL Carbs to 4-BBL Intake Adapter

Three 4-bolt Small Rochester 2-BBL Carbs to 4-BBL Intake Adapter
Three 4-bolt Small Rochester 2-BBL Carbs to 4-BBL Intake Adapter

Click image to enlarge

Speeday Motors Logo
X
Three 4-bolt Small Rochester 2-BBL Carbs to 4-BBL Intake Adapter

Details

Reviews

Q & A

What's in the Box

What we have here is an adapter that allows you to put three two barrel carbs on a four barrel intake. Accepts three small base Rochester four bolt 2-barrel carburetors.  

Notes

This adapter will NOT clear the distributor on the 289-302 SBF even with the small distributor cap.

Specs

  •   4 barrel bolt pattern is 5-1/8” side to side and 5-5/8” front to rear
  •   2 barrel bolt pattern is 3-1/4” side to side by 1-7/8” front to rear
  •   2-3/16” tall bottom to top without the gaskets
  •   Upper 3 x 2 dimension is 4” wide by 13-11/16” long

Item Details

4-bolt small Rochester to 4 bbl intake

You may also be interested in:

Rochester 2G Tri-Power Base Kit Without Linkage
                        

There's nothing cooler than a TriPower on your small block, but  the carbs are expensive and hard to find! With this kit you can use three junk yard 2G small base style Rochester carbs and put together a three deuce set-up for a fraction of the cost.

Includes two new bases for the secondary front and rear carbs, gaskets, jets, power valve and modified piston, idle tubes, plugs, hardware and new primary throttle shaft and butterflies. The center carb (primary) uses its stock base, and parts are included in the kit to modify your stock primary base.

This kit doesn't include an adjustable progressive linkage kit, but the linkage is available separately. 

Rochester 2 GC Tri-Power Carb Installation Instructions (PDF)

Speedway Rochester Tri-Power Throttle Linkage, Progressive
                        

This tri-powered replacement linkage set for Rochester carbs features ball bearing joints needed to create a progressive tri-power linkage. 

  • Tri-powered factory replacement linkage set
  • Ball bearing joints
  • For Rochester carbs with a small base

WARNING:This is to only be used with our Rochester 2G Tri Power base kit (#991011589). It will not work with any other carb/intake combinations.

Rochester Tri-Power Base Kit with Linkage
                        

There's nothing cooler than a TriPower on your small block, but man are the carbs expensive and hard to find! With this kit you can use three junkyard 2G small base style Rochester carbs and put together a three deuce set-up for a fraction of the cost.  Includes two rebuilt bases for the secondary carbs, gaskets, jets, power valve and modified piston, idle tubes, plugs, hardware and new primary throttle shaft and butterflies. This kit includes an adjustable progressive linkage kit.

910-11569 Instructions (PDF)

Rochester Tri-Power Base Installation Instructions (PDF) 

OTB Gear 4032 Rochester 2-G Bug Horn Air Filter Housing, Polished
                        A practical embellishment for the top of your the  Rochester 2-G (2-5/8" dia.) carb. Precision machined of premium aluminum  alloy to fit solidly - secured with a stainless set screw. Each comes  with our all stainless mesh Bug Dome to keep the big stuff out of your  carb. Critters, small stones, loose screws, etc., are not healthy  additives for your engine. The Bug Horn stands only 2" tall, for low  hood clearance considerations. Available in a polished  satin finish.
  • Polished satin finish
  • Fits Stromberg, Holley, Ford, and Rochester 2 barrel carbs
  • Stainless bug dome included
  • Secured with a stainless set screw
  • 2" Tall
  • Also available to fit Stromberg, Holley, Ford, and Rochester 2 barrel carbs
  • We include a 1/4-20 mounting screw
OTB Gear 4033 Rochester 2-G Bug Horn Air Filter Housing, Unpolished
                        A practical embellishment for the top of your the  Rochester 2-G (2-5/8" dia.) carb. Precision machined of premium aluminum  alloy to fit solidly - secured with a stainless set screw. Each comes  with our all stainless mesh Bug Dome to keep the big stuff out of your  carb. Critters, small stones, loose screws, etc., are not healthy  additives for your engine. The Bug Horn stands only 2" tall, for low  hood clearance considerations. Available in an unpolished  satin finish.
  • Unpolished satin finish
  • Fits Stromberg, Holley, Ford, and Rochester 2 barrel carbs
  • Stainless bug dome included
  • Secured with a stainless set screw
  • 2" Tall
  • Also available to fit Stromberg, Holley, Ford, and Rochester 2 barrel carbs
  • We include a 1/4-20 mounting screw
OTB Gear 4220 Rochester 2-G Full Finned Air Cleaner, Polished
                        Classical finned design, accentuated by "doming" the top for more definition. Fits 2-5/8" Diameter carburetors. Featuring our exclusive new Platinum Series filter in the low profile 2" height. The filter media is a medium gray, washable oiled cloth. This is the filter that "sparkles" in the sunlight. The fittings are cast from premium aircraft grade aluminum, which takes a higher than normal shine. All visible surfaces are polished - others may only polish the raised areas. The base casting is precision bored, with an internal shoulder to snugly fit your carburetor - not simply "cast to fit" as others may do. Our internal shoulder also keeps the cleaner from rocking around. Compare our features, we come out shining.

Fits type 94,97, and 98 carbs, securing with a stainless socket set screw.
  • Washable Filter Media
  • Polished
  • Fits type Rochester 2G carbs
  • Secures with 1/4"-20 hardware
OTB Gear 4240 Rochester 2-G Dome Air Cleaner, Polished
                        Great retro design - reminiscent of baby hub caps.  Fits 2-5/8" diameter carburetors. Featuring our exclusive new Platinum  Series filter in the low profile 2" height. This filter media is a medium gray, washable oiled cloth. This is the  filter that "sparkles" in the sunlight. The fittings are cast from  premium aircraft grade aluminum, which takes a higher than normal shine.  All visible surfaces are polished - others may only polish the raised  areas. The base casting is precision bored, with an internal shoulder to  snugly fit your carburetor - not simply "cast to fit" as others may do.  Our internal shoulder also keeps the cleaner from rocking around.  Compare our features, we come out shining.
  • Washable Filter Media
  • Polished
  • Fits type Rochester 2G carbs
  • Secures with 1/4"-20 hardware
OTB Gear 4250 Rochester 2-G Aero Series Air Cleaner, Polished
                        Our bold new Aero series air cleaner is inspired by a great design from the '40's - the radiator cap of the Ford farming tractor. On a multiple carb setup, these babies overlap each other in a way that screams motion, even when parked. Some vintage designs are just too good not to revisit. Fits 2-5/8" diameter carburetors. Featuring our exclusive new Platinum Series filter in the low profile 2" height. The filter media is a medium gray, washable oiled cloth. This is the filter that "sparkles" in the sunlight. The fittings are cast from premium A-356 aircraft grade aluminum, which takes a higher than normal shine. All visible surfaces are polished - others may only polish the raised areas. The base casting is precision bored, with an internal shoulder to snugly fit your carburetor - not simply "cast to fit" as others may do. Our internal shoulder also keeps the cleaner from rocking around. Compare our features, we come out shining.
  • Washable Filter Media
  • Polished
  • Fits type Rochester 2G carbs
  • Secures with 1/4"-20 hardware
OTB Gear 4270 Rochester 2-G Mohawk Air Cleaner, Polished
                        Now, a downscale match to our popular Mohawk 4 barrel air cleaner - and the Rocket Strip valve covers. Cast from A-356 aircraft grade alloy and finished to show standards. Each comes with our 2"X4" Platinum Series filter for practicality and appearance. The filter media is a medium gray, washable oiled cloth. All visible surfaces are polished - others may only polish the raised areas. The base casting is precision bored, with an internal shoulder to snugly fit your carburetor - not simply "cast to fit" as others may do. Our internal shoulder also keeps the cleaner from rocking around. Compare our features, we come out shining.
  • Washable Filter Media
  • Polished
  • Fits type Rochester 2G carbs
  • Secures with 1/4"-20 hardware
Lokar TRP-4003 Tri-Power Throttle Cable Bracket and Springs, Stainless
                        

Designed for Rochester Tri-Power. Kit includes stainless steel throttle cable bracket and stainless steel springs. Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up. Cables operate from center carburetor. Stainless bracket and dual stainless springs are used to mount Lokar's throttle cable and kickdown assemblies.

  • For Rochester Tri-Power
  • Includes stainless steel throttle cable bracket and stainless steel springs
  • Mounts under rear carburetor on Rochester 3-2 set-up
  • Cables operate from center carburetor