Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color

SAME DAY SHIPPING! Order within the next 10 hours 8 minutes and receive same day shipping

Specs
Sold in Quantity:
Each
Color:
Black
Material Type:
Fiberglass
MFG. Part #:
11021
Garage Sale:
No
Overall Width:
1.00
Overall Length:
50.00
Material Thickness:
.04
Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Installation Instructions (PDF)

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings

 

Customer Reviews

This product has no reviews.

Product Q&A

2 questions : 2 answers

1 answers

HOW MANY 2" ROLL'S NEEDED FOR 292 FORD HEADER'S

JW
BOISE, ID
February 21, 2011

HOW MANY 2" ROLL'S NEEDED FOR 292 FORD HEADER'S

Answers

February 23, 2011
Jeremy O
According to Thermo Tec, you will need two rolls to cover your headers.
1 answers

Do you have to wet this produce b4 putting it on?

xr1200
Nashville,tn.
July 05, 2011

Do you have to wet this produce b4 putting it on?

Answers

July 06, 2011
John
Enclosed are installation instructions per manufacturer: Original exhaust wrap installation instructions 1. Determine the length of each tube by measuring from the exhaust port flange to the collector (see chart for material required). IMPORTANT- For each and every bend, add 8” more to overall length of material before cutting. 2. CAREFULLY cut material for each tube and collector. 3. Using a shallow pan of water, moisten wrap to make more pliable, DO NOT SOAK! Wrap material around the top of the first exhaust port flange and secure with Snap Strap or a hose clamp. Wrap tight, neatly and overlap 1/4". Complete all tubes and collector. NOTE: WHEN TUBES ARE, CLOSE FOR EASY WRAPPING USE A FLAT BLADE SCREWDRIVER TO SEPARATE TUBES ENOUGH TO ALLOW MATERIAL TO SLIDE THROUGH. 4. Thoroughly dry wrap, setting in a sunny area or near a heat source. 5. Apply Thermo-Tec's Hi-Heat Coating after wrap has dried. The coating increases the life of the material, changes the color and seals the pores allowing less penetration of liquids. (1) can covers 50' of material. DO NOT USE HI-PRESSURE WASH ON MATERIAL! Use a common garden hose without nozzle attachment.
Page 1 of 1

You may also be interested in:

Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, Natural
(Part #70411001)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings
Thermo Tec 11002 Header Wrap, 2 Inch x 50 Ft, Natural
(Part #70411002)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings
Thermo Tec 11003 Header Wrap, 2 Inch x 100 Ft, Natural
(Part #70411003)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings
Thermo Tec 11022 Header Wrap, 2 Inch x 50 Ft, Black Color
(Part #70411022)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Installation Instructions (PDF)

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings

 

Thermo Tec 11023 Header Wrap, 2 Inch x 100 Ft, Black Color
(Part #70411023)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Installation Instructions (PDF)

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings

 

DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
(Part #9101126)
                        

This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

  • Constructed from pulverized lava rock - titanium-like strength and toughness
  • Reduces underhood temps resulting in cooler air intake for improved performance 
  • Able to handle 25% more heat than conventional wrap
  • Capable of handling more heat than any other wrap found in the market today
  • It’s pliable - no need to wet the wrap when wrapping tubing
  • Will not shrink
  • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
  • Very cool carbon fiber look

Works best on Stainless Steel headers.

Instruction Sheet (PDF)

Frequently Asked Questions (PDF)

Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
(Part #91013800)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Black Color
(Part #91013804)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Heatshield Armor Exhaust Wrap, 1/4 Inch Thick, 12 x 60 Inch Sheet
(Part #91071005)
                        Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
                    
Thermo Tec 13101 Snap Strap
(Part #70413101)
                        

Snap strap stainless steel tie wraps. Enough to install wrap on two headers.  V-8 kit contains eight 9" straps and four 18" straps.

Item Details

Enough to do two headers
Thermo Tec 12001 Hi-Heat Header Wrap Coating, Black
(Part #70412001)
                        

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

The coating also works excellent as a paint directy on metal surfaces.                 

CANNOT BE SHIPPED BY AIR!

Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
(Part #70412002)
                        

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

The coating also works excellent as a paint directy on metal surfaces.                 

CANNOT BE SHIPPED BY AIR!