Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color

							                        

                                                        
Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.
Installation Instructions (PDF)
Typical Small Block Chevy Headers Need:
(2)  704-11002/11022 Wraps
(1)  704-13101 Strap Kit
(2)  70412001 High Heat Coatings
Typical Big Block Chevy and 180 Degree Headers Need:
(2-3)  704-11002/11022 Wraps
(1)     704-13101 Strap Kit
(2-3)  704-12001 High Heat Coatings
 
                                                    

						                        

							                        

                                                        
This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.
Constructed from pulverized lava rock - titanium-like strength and toughness
Reduces underhood temps resulting in cooler air intake for improved performance 
Able to handle 25% more heat than conventional wrap
Capable of handling more heat than any other wrap found in the market today
It’s pliable - no need to wet the wrap when wrapping tubing
Will not shrink 
More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
Very cool carbon fiber look 
Works best on Stainless Steel headers. 
Instruction Sheet (PDF) 
Frequently Asked Questions (PDF) 
                                                    

						                        

							                        

                                                        
Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust  velocity and engine efficiency, as well as reducing  under-hood  temperature up to 70%.  Available in three different roll sizes.
Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.
Typical Small Block Chevy Headers Need:
(2)  704-11002/11022 Wraps
(1)  704-13101 Strap Kit
(2)  70412001 High Heat Coatings
Typical Big Block Chevy and 180 Degree Headers Need:
(2-3)  704-11002/11022 Wraps
(1)     704-13101 Strap Kit
(2-3)  704-12001 High Heat Coatings
                                                    

						                        

							                        

                                                        
Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust  velocity and engine efficiency, as well as reducing  under-hood  temperature up to 70%.  Available in three different roll sizes.
Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.
Typical Small Block Chevy Headers Need:
(2)  704-11002/11022 Wraps
(1)  704-13101 Strap Kit
(2)  70412001 High Heat Coatings
Typical Big Block Chevy and 180 Degree Headers Need:
(2-3)  704-11002/11022 Wraps
(1)     704-13101 Strap Kit
(2-3)  704-12001 High Heat Coatings
                                                    

						                        

							                        

                                                        
Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.
Installation Instructions (PDF)
Typical Small Block Chevy Headers Need:
(2)  704-11002/11022 Wraps
(1)  704-13101 Strap Kit
(2)  70412001 High Heat Coatings
Typical Big Block Chevy and 180 Degree Headers Need:
(2-3)  704-11002/11022 Wraps
(1)     704-13101 Strap Kit
(2-3)  704-12001 High Heat Coatings
 
                                                    

						                        

							                        

                                                        
Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.
Installation Instructions (PDF)
Typical Small Block Chevy Headers Need:
(2)  704-11002/11022 Wraps
(1)  704-13101 Strap Kit
(2)  70412001 High Heat Coatings
Typical Big Block Chevy and 180 Degree Headers Need:
(2-3)  704-11002/11022 Wraps
(1)     704-13101 Strap Kit
(2-3)  704-12001 High Heat Coatings
 
                                                    

						                        

							                        

                                                        
If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 
Retains exhaust heat within the tube for increased flow and horsepower
Reduced underhood temperatures
Protects surronding components from excessive heat
Made from a durable, specially treated woven glass fiber material 
For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.
                                                    

						                        

							                        

                                                        
If your exhaust runs too close to your brake lines, master cylinder,  steering box or even the body, you will cook that item. This easy to use  wrap will protect your investment. 
Retains exhaust heat within the tube for increased flow and horsepower
Reduced underhood temperatures
Protects surronding components from excessive heat
Made from a durable, specially treated woven glass fiber material 
For  a Small Block V8 engine, you will need approximately (2) 2" x 50'  rolls. Big Blocks and 180° style headers may require one additional 2" x  50' roll.
                                                    

						                        

							                        

                                                        Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.