Sign-up for emails
Join now for:
- Promotions & Discounts
- News & Product Info
- Special Event Offers
Rearend Racing Tether$29.99$24.99More Info
AirAid 3-1/2 Inch U-Build-It Master Air Intake Kit with 9 Inch Filter$384.46$249.99More Info
MSD 89952 RPM Chip Tester$99.99More Info
Speedway Mid-Length Modified Racing Headers, Armor Hot Coated$279.99More Info
Boyds Wheels BC1-296145C Junkyard Dog 20x9 Chrome Wheel, 5 on 4-1/2$338.99More Info
XS Power D1200 12 Volt Deep Cycle AGM Battery, 7.8 x 6.69 x 6.54 Inch$205.99More Info
EMPI Buggy Rear Fiberglass Bench Seat, 34-1/2 Inch x 23 Inch$159.99More Info
Speedway Universal 20 Circuit Wiring Harness$164.99More Info
Speedway Chevy Universal Aluminum RadiatorsFrom: $115.99More Info
Ford Front Axle Steering & Brake Kit, 48 Inch AxleFrom: $599.99More Info
Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends$54.99More Info
Comet Pedal Car Assembly Kit, Plain Grey$175.00$149.99More Info
15x7 Inch Steel Smoothie WheelFrom: $77.99More Info
EMPI Bullet Light Assembly with Flat Yellow Lens, Each$39.99More Info
Clay Smith Hydraulic Roller Cam / Lifter Kit, Small Block Chevy 350 w/ E-Street Heads$799.99$779.99More Info
Aluminum Firewall Mount Power Steering Reservoir, Black, 24 oz$84.99$74.99More Info
Bell Supreme SA10 Racing Helmet$259.99More Info
These quality racing tether straps are designed to hold the rearend from sliding back out of the torque tube in the event of an accident.
- Lightweight and low cost
- Oval track racing applications
If you can imagine a custom intake system, now you can build it! The U-Build-It (UBI) kit is the most versatile custom intake system on the market. AirAid's master kits include everything you need to build a complete system, and all components are also available individually for maximum adaptability. Whether you are doing an engine swap or have a custom application where space is tight, the AIRAID® UBI Intake System can accommodate just about any application. The only limitation is your imagination!
Each UBI master kit and individual intake tubes are available in 3", 3.5", and 4" diameters. The roto-molded intake tubes feature multiple angles and straights that allow you to route the intake to any desired location in the engine compartment.
- 3-1/2" Intake tube
- Hump hose
- Hose clamps
- Premium AIRAID® 9" filter*
* Not Legal for sale or use in CA on pollution controlled vehicles
If you are using a MSD ignition box or RPM module, you need to have this RPM checker. It is simple to use as you just plug it in to your ignition box or RPM module and hold down one button. Limits MSD box to 3000 RPM if box is used correctly.
- Essential for any racing class with RPM limitations
- Test MSD box or RPM module
- Simply plug-in and hold button
- 9V battery included
Highly Polished 100% Stainless Steel...Great looks and No Rust...ever! Stronger with a more durable finish - that won't dull - like polished aluminum. Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.
- 10" x 40"
- End location filler neck
- 13-1/2 gallon capacity
- Polished stainless steel
- Designed for Off-Road use
- Cap and straps included
Note: Gallon measurement is an approximation only.
Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)
These mid length modified headers are for BMS, Dirtworks, GRT, Harris, Hoffman, Jet, Larry Shaw and Speedway Motors cars.
- Fit BMS, Dirtworks, GRT, Harris, Hoffman, Jet, Shaw and others
- 1-¾” primary tubes, 3-½” collectors
- 5/16” flange
- Includes gaskets and hardware
- Available AHC coated or painted black (9101106)
Boyd Coddington Junkyard Dog Series chrome wheels offer a perfect blend of traditional hotrod style and the latest technology. They feature a 1-piece A-356 cast aluminum design and come fully chrome plated for a show-stopping shine. The wheels install easily with standard style conical seat lug nuts and are available in multiple diameters, perfect for choosing the stance you want for your ride.
- Fully chrome plated for a show-stopping, low maintenance shine
- Manufactured in the U.S.A.
- Precision 3D-Machined
- Rotary forged 6061 T-6 alloy
- Aluminum etched center cap
- Standard 5 on 4-1/2 inch bolt pattern
- 20 Inch diameter
- 9 Inch wide
XS Power AGM batteries can save you weight and out perform other batteries weighing 10-15 pounds more. These top shelf deep cycle batteries are loaded with features, but are still ultra compact which makes them easy to install in tight places. These batteries are non-spillable and can be mounted in any position except upside-down.
- 12V AGM Battery, Max Amps 2,600A, CA: 725, Ah: 44, 1500W / 3000W
- Weight Lbs. – 33.26
- Weight Kgs. – 15.10
- Length – 7.8 in
- Height – 6.69 in
- Width – 6.54 in
- MAX Amps – 2600
- CA – 725A
- RC – 80min.
- Ah – 44
- M6 Terminal Hardware Included
- 3 Year Warranty
EMPI's fiberglass seats are made from heavy mat and finished with a durable gel coat. They are adaptable to a wide range of applications. For comfort and safety EMPI strongly recommends the use of their custom pre-made covers that are made specifically for these rear bench seats (141-3059).
- Heavy mat with gel coat fiberglass construction
- Universal for multiple applications
- 34-1/4" Wide x 23" Top to Bottom
Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H fuse block holds 18 standard push-in fuses and can be mounted almost anywhere.
Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.
- Harness has 20 circuits, of which 18 are fused
- Taillight leads measure 17' long
- Includes plug for GM column, headlight switch, dimmer switch, and signal flashers
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.
- For 48" kingpin-to-kingpin axles
- Traditional steering arm for left front wheel NOT included with Traditional steering kit
- Available with 5x4.5" or 5x4.75" hubs
Add a custom look to your interior with these universal Buggy Consoles. They are manufactured from heavy duty aluminum, precision welded, and fully polished. They come with three pre-drilled 2-1/16" diameter gauge holes.
- Heavy duty aluminum construction
- Precision welded
- Fully polished
- 3 pre-drilled gauge holes
These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.
Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.
Note: Always use anti-seize to prevent galling the treads during final installation.
Surprise someone special by building them a custom cruiser or a sleek racer with this Comet pedal car kit. This kit features pre-assembled chassis/running gear sub-assemblies, 2-tone wheels with tires installed, and a padded/upholstered seat pad. These kits are ready to paint and assemble.
- Measures 17" wide, 21" tall (to top of steering wheel), and 40" long
- Ready to paint and assemble
- The chassis/running gear sub-assemblies are painted flat black and pre-assembled
- The wheels are painted 2-tone (gray and white) and have the tire already installed
- Padded, upholstered seat pad included (black)
- Includes chrome:
- Windshield frame
- Hood ornament
- Smooth hubcaps
- Grille emblem
- 2-spoke steering wheel
Raw or Chrome steel smoothie rims feature 5 on 4-1/2" and 5 on 4-3/4" dual bolt patterns in 15" diameters. Features 3/16" thick steel centers with a reinforcing rib for extra strength. These come with a valve stem hole for a 1/2" valve stem.
- 5 on 4-1/2" or 5 on 4-3/4" dual bolt patterns
- 15" wheels with standard backspacing
- 7" bead width and 4" backspace
- Choose plain or chrome finish
- Center cap and trim ring sold separately
EMPI Bullet Aluminum lights feature a High Power 12-Volt 50 Watt Halogen bulb with a mirror finish reflector encased in a compact (approx. 3-1/2" tall by 2-1/2" diameter) housing. Comes with flat, yellow lens. All light assemblies come in attractive EMPI display packaging. (Off-Road Use Only)
- Precision machined aluminum housing
- Mounts on flat or slightly rounded surfaces
- Flat Yellow lens
- Sold each
These camshaft / lifter kits are perfect for use with SBC 350 to 360 CID with Edelbrock E-Street 185-210 heads. Max power 6000-6200 rpm Peak Torque 3600-3800. Aggressive idle and throttle response. This cam is for the guy wanting neck-snapping power from stoplight to stop light. 15/8" headers work best but RAM Horn manifolds can be used. A 2400 stall and 750 CFM carb will work the best with this cam. Use with minimum of 9:1 compression.
- Adv. - 280 / 294
- .050" - 221 / 235
- .100" - 191 / 204
- .200" - 140 / 150
- .300" - 74 / 79
- Lift - .510 / .510
- Centerlines - 104 / 112
- Lobe Sep. - 108
- Includes a set of tie-bar style hydraulic roller lifters
Vertical mounted power steering reservoir tanks available in 24 oz. lightweight. These tanks are NOT internally baffled.
- Features male AN # 6 side inlet return fitting, 1/2" npt female outlet port and 1/8" female npt side port for wing valve
- Use rubber hose and push-lock fittings, or braided stainless steel lines.
Speedway Motors has teamed up with Bell USA to bring a Bell quality racing helmet to the sportsman or entry level racer. We are proud to introduce a Speedway Motors exclusive: the “Supreme” helmet by Bell. The Snell SA2010 rated Supreme helmet is designed to offer value and quality at an affordable price.
- Snell SA2010 Racing Helmet
- Sportsman or Entry Level Racer
- Unmatched Value and Quality
Tear off posts are included. Available in white, black or flat black.
Bell Helmet Sizing Chart (PDF)