Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

T-Bucket Stainless Brake Line Kit

SAME DAY SHIPPING!

Specs
Material Type:
Stainless Steel
Sold in Quantity:
Kit
Hardware Included:
Yes
Garage Sale:
No
Notes
Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware.

Share by Email

From
To

Click image to enlarge

Watch the videos below to learn more about Speedway Motors T-Bucket assembly and the completed project.





X

Details

Reviews

Q & A

What's in the Box

Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.

Notes: Does not work with '27 T chassis.  Also of note, due to unlimited rear axle brake combinations, this kit will not include rear axle housing brake lines, hoses, or fittings.  The kit will include the AN style brake hose to transfer from the rear crossmember to the housing.  The chassis builder/installer will then need to continue the brake line system from that point on to both rear wheels with necessary brake fitting hardware as needed.

Due to the different brakes and caliper combinations, this kit will NOT include caliper/wheel cylinder fittings.

Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

You may also be interested in:

9 Inch Ford Rear Axle Option
                        

This all-new 9" Ford housing features big bearing ends (bearings included) and lifetime warranty 31-spline axles with dual bolt patterns (5 x 4.5" and 5 x 4.75"). Center section NOT included.

Note: When this item is ordered with a T-Bucket frame kit, the housing will be shipped with all necessary suspension brackets welded to it, according to the chassis you order.

Small Block Ford and C4 Auto Trans Mount Option for T Frame Kit
                        

This T-frame option will include tubular engine and transmission crossmembers welded into your '23 or '27 T-Bucket chassis. Will accept S/B Ford engine and C-4 transmission only.

Note: When ordering this option with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  As such, this engine/transmission crossmember option must be ordered with a T Frame kit. This is not available separate of a T frame kit.

  • When this item is ordered with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  
  • Due to clearance issue with the Vega steering box, you will need to either remote mount the oil filter or make use of the 90 degree oil filter adaptor # 910-6880.
Small Block Chevy and TH350 Auto Trans Mount Option For T Frame Kit
                        

This T frame kit option includes tubular engine and transmission crossmembers welded into a '23 or '27 T-Bucket frame. Will accept S/B Chevy engine and TH-350 or TH-400 transmissions.

Note: When ordering this option with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  As such, this engine/transmission crossmember option must be ordered with a T frame kit.   This is not available separate of a T frame kit.

If you are interested in the mounts separate of the T frame kit, please see the suggested items found below.