Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

T-Bucket Interior Kit For 1923 Standard Body W/ Unchanneled Floor

SAME DAY SHIPPING! Order within the next 14 hours 28 minutes and receive same day shipping

Specs
Material Type:
Vinyl
Color:
Black
Sold in Quantity:
Each
Garage Sale:
No
T-Bucket Interior Kit For 1923 Standard Body W/ Unchanneled Floor
T-Bucket Interior Kit For 1923 Standard Body W/ Unchanneled Floor
T-Bucket Interior Kit For 1923 Standard Body W/ Unchanneled Floor
T-Bucket Interior Kit For 1923 Standard Body W/ Unchanneled Floor
Product Video
T-Bucket Interior Kit For 1923 Standard Body W/ Unchanneled Floor

Click image to enlarge

Watch the videos below to learn more about Speedway Motors T-Bucket body styles and configurations, general assembly and the completed project.







Details

Reviews

Q & A

What's in the Box

Completing that last important step in building your Speedway T-Bucket just got easier. This interior kit is designed for proper fit and easy installation specifically into a Speedway Motors T bucket body, eliminating an expensive trip to the upholstery shop. Fitment into any other brand of T bucket body is not guaranteed.  Kit includes stiched side panels, ergonomic seat bottom cushion and riser, seat back cushion, plus fully sewn floor and firewall carpeting.

Select from black or dark brown vinyl upholstery.

Installation Instructions (PDF)

Customer Reviews

This product has no reviews.

Product Q&A

8 questions : 8 answers

1 answers

I have a VW T Bucket and I was wondering how wide is the top of the seat & the bottem of it ? And will the top ralls fit my Car ? The top of the seat is end side to end side is 44" The out side for the top ruff at the bottom is 48" At the windshield to th

Auto
Greene Co Willard,Mo.
December 07, 2011

I have a VW T Bucket and I was wondering how wide is the top of the seat & the bottem of it ? And will the top ralls fit my Car ? The top of the seat is end side to end side is 44" The out side for the top ruff at the bottom is 48" At the windshield to th

Answers

December 08, 2011
Dave
The seat included in the Speedway T upholstery kit is 36 ¾” across at the top and 34” at the bottom. The T Bucket body is slightly wider than the seat back at the rear where the side panels curve in to meet it. The top bow kit is universal in fit and would be able to be utilized in a T bucket application.
1 answers

can i buy just the top roll panel or do i have too buy all of it?

Bob
Detroit Mi
August 05, 2011

can i buy just the top roll panel or do i have too buy all of it?

Answers

August 11, 2011
John
This interior kit comes complete pre packaged by the supplier and currently we do not list individual items separately. You may want to check with a local upholstery shop for assistance.
1 answers

How thick is the foam on the side panels

CJ
Menomonie. Wi.
July 19, 2011

How thick is the foam on the side panels

Answers

July 20, 2011
QC
The side foam is 5/8" thick.
1 answers

What type of material is the backing under the foam

CJ
Menomonie Wi
July 18, 2011

What type of material is the backing under the foam

Answers

July 19, 2011
Zach
On our T bucket interior kits, part number 7151100 and 7151102, the side panels use a cardboard backing, and the seat foam uses a plywood bottom.
1 answers

can this be used in your body w/ opening rt door? if so what is required?

February 10, 2011

can this be used in your body w/ opening rt door? if so what is required?

Answers

February 14, 2011
Pat
This interior kit will not fit the body with the door it will only fit the body without a door at this time.
1 answers

Hello: I have a Total Performance T-bucket kit (standard body) but need an interior for it. Will your interior kit and bed cover fit it? Thanks, Ed

Ed
Linden, NJ
January 23, 2011

Hello: I have a Total Performance T-bucket kit (standard body) but need an interior for it. Will your interior kit and bed cover fit it? Thanks, Ed

Answers

January 26, 2011
Ken
Our interior kit is only suitable for the current, Speedway Motors bodies. Since there are no more interior kits for the Total Performance bodies available, I recommend that you consult with a local Auto Trim shop for your application.
1 answers

Does the T bucket upholstery just fit in with Velcro all around the inside of the body like the video shows? Also is the material roll AND pleated? Thanks Butch Old customer of yours.

Butch27
Garden City, MI
January 02, 2011

Does the T bucket upholstery just fit in with Velcro all around the inside of the body like the video shows? Also is the material roll AND pleated? Thanks Butch Old customer of yours.

Answers

January 05, 2011
Clark
Yes, the interior does fasten in with Velcro strips. No, it is not really tuck & roll. There is foam behind the vinyl and there is a backing material behind the foam. There is stitching done (face sewing) to add character and surface “excitement”. This is an attractive and reasonably priced upholstery option.
1 answers

Will this kit fit the Tribute T body kit?

Jim
Madison Heights, MI
November 14, 2011

Will this kit fit the Tribute T body kit?

Answers

November 15, 2011
John
These interior kits will not work on the Tribute T without extensive modification. The Transmission tunnel is different and the drive shaft tunnel is added to the interior of the Tribute T to achieve the lower ride stance. We are starting production of the interior kit for the Tribute T under part number 7151104, the Bomber seats number 91070057 with accessory of the pads number 7151105, and the seat risers number 91070029.
Page 1 of 1

You may also be interested in:

Standard 1923 T Roadster Body
(Part #9002200)
                        

Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

  • Total Length:  52"
  • Firewall Width:  26.5"
  • Body Width:  45"
  • Body Height:  24"
  • The body weighs approximately 41 pounds

This product is made to order. Please allow two to three weeks for lead time.

Truck Freight Shipping Charges Apply - click here for details

Warmseats Seat Heater
(Part #91070030)
                        

Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

910-70030 Instructions (pdf)

Engine Turned Aluminum Panels
(Part #91139520)
                        You can now give your car the look you have been looking for with our engine turned aluminum panels.  These 0.063" thick aluminum panels are 6" wide and feature 1/2" swirls.
                    
Speedway Hot Rod Shifter Boots
(Part #91021801)
                        

Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws.

Base ring has 4" inside diameter and 5" outside diameter.
   

Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
(Part #4462400)
                        

This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. 

  1. Select (1) column mount diameter needed.
  2. Select (1) boot color needed, part # 4462405-color.
446-2400 Instructions (PDF)
Cover Only for 20 Inch T-Bucket Pick-Up Box
(Part #7151109)
                        

Completing that last important step in building your Speedway T-Bucket just got easier. This pick-up box cover will compliment your interior kit with matching color.

Select from black or brown vinyl upholstery.

T-Bucket Interior Kit For 1923 Standard Body W/ Channeled Floor
(Part #7151102)
                        

Completing that last important step in building your Speedway T-Bucket just got easier. This interior kit is designed for proper fit and easy installation specifically into a Speedway Motors T bucket body, eliminating an expensive trip to the upholstery shop. Fitment into any other brand of T bucket body is not guaranteed.  Kit includes stiched side panels, ergonomic seat bottom cushion and riser, seat back cushion, plus fully sewn floor and firewall carpeting.

Select from black or dark brown vinyl upholstery.

Installation Instructions (PDF)

T-Bucket Interior Kit For 1923 Deluxe Body W/ Door, Unchanneled
(Part #7151101)
                        

Completing that last important step in building your Speedway T-Bucket just got easier. This interior kit is designed for proper fit and easy installation specifically into a Speedway Motors T bucket body, eliminating an expensive trip to the upholstery shop. Fitment into any other brand of T bucket body is not guaranteed.  Kit includes stiched side panels, ergonomic seat bottom cushion and riser, seat back cushion, plus fully sewn floor and firewall carpeting. 

Select from black or dark brown vinyl upholstery.

Installation Instructions (PDF)

T-Bucket Interior Kit For 1923 Deluxe Body W/ Door, Channeled
(Part #7151103)
                        

Completing that last important step in building your Speedway T-Bucket just got easier. This interior kit is designed for proper fit and easy installation specifically into a Speedway Motors T bucket body, eliminating an expensive trip to the upholstery shop. Fitment into any other brand of T bucket body is not guaranteed.  Kit includes stiched side panels, ergonomic seat bottom cushion and riser, seat back cushion, plus fully sewn floor and firewall carpeting.

Select from black or dark brown vinyl upholstery.

Installation Instructions (PDF)

Car Cover, T-Bucket, No Top Cars, 20 Inch Tall Windshields
(Part #7155511)
                        

This car cover is the perfect solution to the occasional flash rain storm or for safely storing your T-Bucket for the winter. This car cover is made exclusively for Speedway Motors by California Car Cover Co. featuring Kimberly Clark's highly water resistant NOAH® material, which is perfect for indoor or outdoor use.

 This car cover works with 1923 T-Bucket bodies only without roadster tops.

  • Guaranteed to never scratch
  • Elastic tensioners are sewn-in front and rear to facilitate a snug fit
  • Fabrics are precision-cut on computer-controlled equipment for optimum fit
  • Provisions for cable locks for added security
  • Extra wide 60" material used to reduce the number of seams required
  • Seams are overlapped and double-stitched for optimum seal and durability
  • Materials are tightly woven to prevent shrinkage from wet/dry cycles