Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB

Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Black Oxide
Spline Count:
48
End #1:
3/4 inch Round
MFG. Part #:
401-50610
Set Screw Included:
Yes
Max Operating Angle:
30
Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

  • Works with: Wilwood, Sweet Jaguar, MGB
  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-48 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Item Details

Wilwood, Sweet Jaguar, MGB
3/4"-48 Spline

Application

When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.

STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.

STEP 2

Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.

STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.

Notes

Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.

Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint.

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

What are dimensions of the joint? Particluarly OD at center (re: clearance at exhaust manifold is my issue.) Adapting a Jaguar 48 spline to a T-bird Super Coupe DD steering column. Experiencing clearance issues with the stock Jag flexible u-joint.

jclars
Lynden, WA 98264, USA
March 14, 2013

What are dimensions of the joint? Particluarly OD at center (re: clearance at exhaust manifold is my issue.) Adapting a Jaguar 48 spline to a T-bird Super Coupe DD steering column. Experiencing clearance issues with the stock Jag flexible u-joint.

Answers

March 15, 2013
Jason
The 3/4-48 spline to 3/4" round sweet u-joint is 3.75" overall in length and 1.535" od at widest point.
Page 1 of 1

You may also be interested in:

Sweet Mfg Steering U-Joint, 3/4-48 Spline to 3/4 In DD, Wilwood/SJ/MGB
(Part #91032295)
                        

Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints work with Wilwood, Sweet Jaguar, and MGB with their 3/4"-48 spline. 

  • Works with: Wilwood, Sweet Jaguar, MGB
  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-48 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Item Details

Wilwood, Sweet Jaguar, MGB
3/4"-48 Spline
Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
(Part #91032395)
                        

Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These 3/4"-48 spline steering universal joints work with Wilwood, Sweet Jaguar, and MGB.

  • Works with: Wilwood, Sweet Jaguar, MGB
  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-48 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Item Details

Wilwood, Sweet Jaguar, MGB
3/4"-48 Spline
Sweet Mfg Coupler, 3/4 48 Spline to 3/4 Round Non-Flex, Wilwood
(Part #91032282)
                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Spline Size (Link)

Item Details

Wilwood, Sweet Jaguar, MGB
3/4"-48 Spline
3/4 O.D. Solid Steel Steering Shaft
(Part #91632200)
                        

Speedways steering shaft is made for you to cut-to-fit. This steering shaft entails:

  •  3/4" O.D.
  • 1018 solid steel steering shaft
  • Available in 24", 36", 48", 60" and 72" lengths

 

Steer Shaft Application Chart

Polished Stainless Steel 3/4 O.D. Double D Shaft
(Part #91032377)
                        

Steering shafts that are just plain looking look kind of silly with those shiny stainless steel U-joints. Our polished, stainless steel, double D steering shaft would be more compatible. We offer steering shafts in 18", 22", and 36" cut to fit lengths.

 

Sweet Mfg Steering U-Joint, 3/4-48 Spline to 3/4 DD, Wilwood, MGB
(Part #9106101)
                        

Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-48 Spline
  • Wilwood, Sweet, Jaguar, MGB
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Item Details

3/4"-48 Spline to 3/4" Double D
Wilwood, Sweet, Jaguar, MGB
Sweet Mfg Chrome U-Joint, 3/4-48 Spline to 1 In DD, Wilwood, MGB
(Part #9106102)
                        

Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-48 Spline
  • Wilwood, Sweet, Jaguar, MGB
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Item Details

3/4"-48 Spline to 1" Double D
Wilwood, Sweet, Jaguar, MGB
Steering Shaft, Fully Machined Double D Shaft, Raw 22 Inch
(Part #91001850)
                        

 Speedway now offers a steering shaft that is 3/4" DD machined the entire length of the shaft. This makes it easier to set up your steering. The carbon steel steering shaft come in 22".

 

Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
(Part #1750757)
                        3/4" heim for steering shaft support.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


Item Details

.757" Ball Hole
Firewall Mount Steering Flange Sleeve, 3/4 Inch Shaft
(Part #91032375-750)
                        This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" mounting holes. 

Choose 3/4" (750) or 1" (1000) shaft size.

91032375-1000

  • Height: .74"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
91032375-750
  • Height: .87"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"