Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Steering Coupler, 3/4"-36 Spline To 3/4" Round Non-Flex

SAME DAY SHIPPING! Order within the next 10 hours 25 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Length:
2.00
Sold in Quantity:
Each
Finish:
Natural
Overall Diameter:
1.03
End #1:
3/4 inch Round
End #2:
3/4"-36 spline
Spline OD:
.75
Spline Count:
36
MFG. Part #:
30130120
Sweet Mfg Steering Coupler, 3/4 36-Spline, 3/4 Rnd Non-Flex, GM Man/Mustang II

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Steel coupler is splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D.

When ordering, select applicable hole size/spline needed.

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Item Details

GM Manual, Mustang II Power
3/4"-36 Spline

Customer Reviews

Rated 5 out of 5 by 7 reviewers.
RATING BREAKDOWN
7 reviews
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

streetfreak77
Verified Purchaser
Modesto, CA, USA
Product Rating

The "Splines" fit perfect !

December 25, 2013
This coupler is a fine addition to the "Gasser" that I'm working on. The coupler slipped right on the 63 corvette steering box shaft . PARTS THAT FIT---Thanks Speedway
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Barger62
Verified Purchaser
Hardinsburg, KY
Product Rating

Slid right in place of my ragjoint

August 30, 2010
Cleaned up the engine bay to make room for headers and gained a way to remove my factory steering shaft with my new headers.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Aboatbuggy
Verified Purchaser
Arizona
Product Rating

Works great, no mods needed.

June 07, 2011
Fast and easy way to hook up steering.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Mikey
Verified Purchaser
Troy, MI
Product Rating

Just what I needed!

August 09, 2010
Great item[...] Not sure they are worth almost 15 a piece though!
Pros:
  • Versatility
  • Fit Quality on splines
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Papataylor
Verified Purchaser
Oak Harbor, WA
Product Rating

Coupler

March 04, 2011
Nice product. Described to a T. A little bit spendy but worth it. Thanks
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

michiganbullit
leslie,mi.
Product Rating

I would buy this product again

February 21, 2010
very nice part
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

spraycan_harry
Verified Purchaser
Southern,Missouri
Product Rating

I would buy this again!

May 25, 2012
Great product! We used this mainly for connecting the quick steer unit. Used on other cars as well with no problems.
Pros:
  • Strong
  • Fair priced good fit
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
91032281

Product Q&A

1 questions : 1 answers

1 answers

Is this coupler 36 spline on one side and smooth bore on the other Is this coupler 36 spline on one side and smooth bore on the other?

Russ52
Carriere Miss. 39426
April 11, 2015

Is this coupler 36 spline on one side and smooth bore on the other Is this coupler 36 spline on one side and smooth bore on the other?

Answers

April 13, 2015
EricM
Yes this has 3/4" - 36 spline on one end and 3/4" round on the other end.
Page 1 of 1

You may also be interested in:

Sweet Mfg. Coupler, 3/4 20 Spline to 3/4 Round Non-Flex Coupler
(Part #91032286)
                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
(Part #91032235)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This steering universal joint is the highest quality for racing or street use.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 5/8"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

U-Joint, 3/4"-36 Spline To 3/4" Round Weld-on
(Part #91032236)
                        

Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  •  3/4"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB
(Part #91032241)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

  • Works with: Wilwood, Sweet Jaguar, MGB
  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-48 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg U-Joint, 3/4 In 36-Spline to 3/4 DD, GM Manual/Mustang II
(Part #91032294)
                        

Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  •  3/4"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg U-Joint, 3/4 36-Spline to 1 In DD, GM Manual/Mustang II
(Part #91032394)
                        

Don't jeopardize your safety with inferior quality Mustang II power rack U joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing. These steering universal joints have full compliment bearings and 3/4"-36 spline.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  •  3/4"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg Coupler, 3/4 30 Spline, 3/4 Rnd Non-Flex, Small GM '78-Up
(Part #91032280)
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other.

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Spline Size (Link)

Sweet Mfg Coupler, 13/16 36 Spline, 3/4 Rnd Non-Flex, Big GM Pre '78
(Part #91032283)
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other.

Fits big GM gear box for pre 1978 vehicles.

When ordering, select applicable hole size/spline needed.

Warning: This coupler is splined 13/16 x 36 all the way through.  It fits OK on 3/4" round shaft for welding, even though it has interior splines.

Coupler = 2" L x 1.060" D

Sweet Mfg. Steering Coupler, 9/16In 26 Spline to 3/4 In Round Non-Flex
(Part #91032285)
                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
(Part #910850)
                        

These polished stainless steel steering U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted These steering universal joints are 3-3/4 inch in length and are 1.650 inch in outside diameter. 

  • The OD is 1.650" (41.90mm) 
  • 3-3/4" in total length
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Sweet Mfg Steering U-Joint 3/4-36 Spline, 3/4 DD, GM Manual/Mustang II
(Part #9106120)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-36 Spline

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg Chrome U-Joint, 3/4-36 Spline, 1 DD, GM Manual/Mustang II
(Part #9106122)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. They feature a double D end to make use of the double D shaft.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  • 3/4"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Speedway Steering Coupler, 3/4 Inch-36 to 3/4 Inch Round, Non-Flex
(Part #91031581)
                        These steel couplers are splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D. 
  • 3/4"-36 to 3/4" round
  • Steel
  • Black oxide coating
  • Commonly used on GM Manual and Mustang II Power rack
  • 2" L x 1.060" OD

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.


 

Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
(Part #1750757)
                        3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


Firewall Mount Steering Flange Sleeve, 3/4 Inch Shaft
(Part #91032375-750)
                        This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" mounting holes. 

Choose 3/4" (750) or 1" (1000) shaft size.

91032375-1000

  • Height: .74"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
91032375-750
  • Height: .87"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
Steering Shaft, Hollow 48 Inch
(Part #91632201-48)
                        

This steering shaft is hollow and is cut-to-fit. This steering shaft entails:

  •   3/4" DOM
  • .120" wall hollow steering shaft
  • Available in 24", 36", 48", 60" and 72" length
  • Steel Steering shaft