Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Sweet Mfg. Steering Coupler, 3/4 20 Spline to 3/4 Round Non-Flex Coupler

SAME DAY SHIPPING! Order within the next 8 hours 29 minutes and receive same day shipping

Sweet Mfg. Steering Coupler, 3/4 20 Spline to 3/4 Round Non-Flex Coupler
Sweet Mfg. Steering Coupler, 3/4 20 Spline to 3/4 Round Non-Flex Coupler

Click image to enlarge

Speeday Motors Logo
X
Sweet Mfg. Steering Coupler, 3/4 20 Spline to 3/4 Round Non-Flex Coupler

Details

Reviews

Q & A

What's in the Box

Steel coupler is splined on one end and has a 3/4" round hole on the other.

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Item Details

3/4"-20 Spline to 3/4" Round
Non-Flex Coupler

You may also be interested in:

Sweet Mfg Steering Coupler, 3/4 30 Spline, 3/4 Rnd Non-Flex, Small GM '78-Up
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other.

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Spline Size (Link)

Steering Coupler, 3/4"-36 Spline To 3/4" Round Non-Flex
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D.

When ordering, select applicable hole size/spline needed.

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Sweet Mfg Steering Coupler, 3/4 48 Spline to 3/4 Round Non-Flex, Wilwood
                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Spline Size (Link)
Sweet Mfg Steering Coupler, 13/16 36 Spline, 3/4 Rnd Non-Flex, Big GM Pre '78
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other.

Fits big GM gear box for pre 1978 vehicles.

When ordering, select applicable hole size/spline needed.

Warning: This coupler is splined 13/16 x 36 all the way through.  It fits OK on 3/4" round shaft for welding, even though it has interior splines.

Coupler = 2" L x 1.060" D

Sweet Mfg Steering Coupler, 5/8 36 Spline, 3/4 Rnd Non-Flex, Vega/Corvair/GM
                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  

When ordering, select applicable hole size/spline needed.

Coupler = 2" L x 1.060" D

Sweet Mfg. U-Joint, 3/4 Inch-20 Spline to 3/4 Inch Round, Weld-On
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends. U-joints available for round or double D shaft.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing
  • Features needle bearing u-joints
  • U-Joint=3.875" L x 1.375" D
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

 

Speedway 3/4 OD Steel Weld-On Double-D Steering Shaft, 12 Inch Length
                        

This steering shaft is 3/4" O.D DD. This steering shaft also has a 1.00" long "D" design on each end.

This steering shaft entails:

  • 1018 Steel
  • Weld on
  • Excellent for steering shafts or other uses 
  • Order desired length

NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.