Sweet Mfg. Double Steering U-Joint, 1 Inch-48 Spline to 3/4 Inch Round, GM Column

							                        

                                                        
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering u-joints have 3/4 weld-on ends.
Full compliment bearings
Forged Vanadium steel yokes and u-joint
Highest quality for racing
Features needle bearing u-joints 
U-Joint=3.875" L x 1.375" D
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
 
                                                    

						                        

							                        

                                                        
These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation.
The OD is 1.650" (41.90mm)  
 3-3/4" in total length
This size of spline works with Unisteer's Cross Steer Rack & Pinion,  Prostock Rack, and Manual Camaro Rack & Pinion and is  also the size of manual Mustang Style Rack & Pinions. 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.
                                                    

						                        

							                        

                                                        
These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation.
This particular U-Joint's Size is 3/4"-36 count spline by 3/4"DD. This  is the size that is used on Ford Power rack & pinions such as the  Mustangs. This U-joint uses pinch bolt fasteners on either side.
The OD is 1.650" (41.90mm)  
 3-3/4" in total length
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
NOTE:  These  u-joints contain a safety feature that requires the DD steering shaft  to be notched for pinch bolt clearance. Once notched, the pinch bolt  MUST be torqued to 45 ft/lbs to ensure a tight fit.
                                                    

						                        

							                        

                                                        
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.
Full compliment bearings
Forged Vanadium steel yokes and u-joint
Highest quality for racing or street
Features needle bearing u-joints
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:   GM columns measure slightly less than 1"   while IDIDIT and Flaming   River columns measure a true 1".  DO NOT   interchange these u-joints. 
                                                    

						                        

							                        

                                                        
Don't jeopardize your safety with inferior quality Mustang II power rack U joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.
Full compliment bearings
Forged Vanadium steel yokes and u-joint
Highest quality for racing or street
Features needle bearing u-joints
 3/4"-36 Spline
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:    GM columns measure slightly less than 1"   while IDIDIT and Flaming    River columns measure a true 1".  DO NOT   interchange these u-joints. 
                                                    

						                        

							                        

                                                        
Don't jeopardize your safety with inferior quality steering  components. Speedway offers only the finest steering U-joints available.  Made by Sweet Manufacturing. These steering u-joints have a 3/4  round weld-on end.
Full compliment bearings
Forged Vanadium steel yokes and u-joint
Highest quality for racing
Features needle bearing u-joints 
U-Joint=3.875" L x 1.375" D
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:   GM columns measure slightly less than 1"   while IDIDIT and Flaming   River columns measure a true 1".  DO NOT   interchange these u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. Made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.
Spline Size (Link)
Steering Box/Rack/Spline Chart (Link)
Note:  GM columns measure slightly less than 1"   while IDIDIT and Flaming  River columns measure a true 1".  DO NOT   interchange these u-joints. 
                                                    

						                        

							                        

                                                        
These polished stainless steel U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted. 
The OD is 1.650" (41.90mm)  
 3-3/4" in total length
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. Made of forged vanadium steel and real needle bearing joints.
These are 5-3/4" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:    GM columns measure slightly less than 1"   while IDIDIT and Flaming    River columns measure a true 1".  DO NOT   interchange these u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard  steering u-joint can give you. Our double u-joints allow up to 70  degrees of angle or 1" of offset for just those occasions. Made of  forged vanadium steel and real needle bearing joints.
These are 5-5/8" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:     GM columns measure slightly less than 1"   while IDIDIT and Flaming     River columns measure a true 1".  DO NOT   interchange these  u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard  steering u-joint can give you. Our double u-joints allow up to 70  degrees of angle or 1" of offset for just those occasions. Made of  forged vanadium steel and real needle bearing joints.
These are 5-3/4" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:     GM columns measure slightly less than 1"   while IDIDIT and Flaming     River columns measure a true 1".  DO NOT   interchange these  u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard  steering u-joint can give you. Our double u-joints allow up to 70  degrees of angle or 1" of offset for just those occasions. Made of  forged vanadium steel and real needle bearing joints.
These are 5-3/4" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:     GM columns measure slightly less than 1"   while IDIDIT and Flaming     River columns measure a true 1".  DO NOT   interchange these  u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard  steering u-joint can give you. Our double u-joints allow up to 70  degrees of angle or 1" of offset for just those occasions. Made of  forged vanadium steel and real needle bearing joints.
These are 5-3/4" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:     GM columns measure slightly less than 1"   while IDIDIT and Flaming     River columns measure a true 1".  DO NOT   interchange these  u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard  steering u-joint can give you. Our double u-joints allow up to 70  degrees of angle or 1" of offset for just those occasions. Made of  forged vanadium steel and real needle bearing joints.
These are 5-3/4" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:     GM columns measure slightly less than 1"   while IDIDIT and Flaming     River columns measure a true 1".  DO NOT   interchange these  u-joints. 
                                                    

						                        

							                        

                                                        
Sometimes you need just a little bit more clearance than a standard  steering u-joint can give you. Our double u-joints allow up to 70  degrees of angle or 1" of offset for just those occasions. Made of  forged vanadium steel and real needle bearing joints.
These are 5-3/4" Long 
Steering U-Joints and Couplers Application Chart (GIF) 
Steering Box/Rack/Spline Chart (Link)
Spline Size (Link) 
Note:     GM columns measure slightly less than 1"   while IDIDIT and Flaming     River columns measure a true 1".  DO NOT   interchange these  u-joints.