Sweet Mfg Double U-Joint, 3/4 In DD to 1 In DD, IDIDIT/Flaming River
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.
- These are 5-3/4" Long
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
Item Details3/4" Double D to 1" Double D
Ididit, Flaming River
ApplicationWhen purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the u-joint for your specific application.
More Like This
Sweet Mfg Chrome Double U-Joint, 3/4 Inch DD to 1 Inch DD, GM
Sweet Mfg. Double U-Joint, 1 DD to 3/4 Round, IDIDIT/Flaming River
Sweet Mfg Chrome Double U-Joint, 3/4 Inch-30 Spline to 3/4 Inch DD
Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
Sweet Mfg. Double U-Joint, 1 In 48-Spline to 3/4 In DD, GM Column
Sweet Mfg. 401-91919 Chrome Double U-Joint, 3/4 Inch DD to 3/4 Inch DD
Sweet Mfg Chrome Double U-Joint, 9/16 Inch-26 Spline to 3/4 Inch DD
Sweet Mfg Chrome Double U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
Sweet Mfg. Double Steering U-Joint, 9/16In-26 Spline to 3-4 In DD, MII
Sweet Mfg. Double U-Joint, 3/4 In 36-Spline to 3/4 In DD, GM, MII