Sweet Mfg. 208-06185 6:1 Ratio Steering Box

							                        

                                                        
Power steering pump combos include:
Sweet Mfg. cast iron power steering pump 
Block mount bracket with hardware 
Standard weight aluminum reservoir tank 
Tank mounting bracket 
Reservior bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
910-32912 Instructions (PDF)
                                                    

						                        

							                        

                                                        
This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 8 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 8 90° push-on hose ends.
NOTE: Does NOT contain steering box fittings 
                                                    

						                        

							                        

                                                        
These Sweet 700 Series Sportsman power steering boxes have new quick ratio gear sets in them which significantly speeds up the steering. This steering box features new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars. 
-6 AN hose fittings. 13/16" 36-spline input.
When using a steering quickener, we recommend using a .185 valve steering box. Anything higher will be extremely hard to steer! 
IMCA Approved  
                                                    

						                        

							                        

                                                        
These Sweet 700 Series Sportsman power steering boxes have new quick ratio gear sets in them which significantly speeds up the steering. This steering box features new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars. 
-6 AN hose fittings. 13/16" 36-spline input.
When using a steering quickener, we recommend using a .185 valve steering box. Anything higher will be extremely hard to steer! 
IMCA Approved  
                                                    

						                        

							                        

                                                        
This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 10 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN 10 blue aeroquip hose  One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 10 90° push-on hose ends.
NOTE: Does NOT contain steering box fittings 
                                                    

						                        

							                        

                                                        
Power steering pump combos include:
Sweet Mfg. cast iron power steering pump 
Block mount bracket with hardware 
Standard weight aluminum reservoir tank 
Tank mounting bracket 
Reservior bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
910-32913 Instructions (PDF)
                                                    

						                        

							                        

                                                        
Complete with -6AN fittings
Mounts on two 1/4" bolts or with standard tie wraps
Mounts in return line to tank
Lowers fluid temperature up to 30°
A leading cause of power steering component failure is excessive fluid temperature
14-3/4" total length with fittings 
                                                    

						                        

							                        

                                                        
These tube & fin power steering fluid coolers use 1/2" copper tubing expanded into aluminum cooling fins to extend pump and seal life and improve steeing performance.
2-pass design
Extends pump and seal life
11/32" hose barb inlets
4 feet of hose included
Extruded plastic cooling fin guards
Black powder coated finish
Hardware kit included
Instructions (PDF)
                                                    

						                        

							                        

                                                        
These tube & fin power steering fluid coolers use 1/2" copper tubing expanded into aluminum cooling fins to extend pump and seal life and improve steeing performance.
2-pass design
Extends pump and seal life
11/32" hose barb inlets
4 feet of hose included
Extruded plastic cooling fin guards
Black powder coated finish
Hardware kit included
Instructions (PDF)