Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Stewart Warner 82472 Wings Fuel Level Gauge, Black

Specs
Sold in Quantity:
Each
Gauge Type:
Electric
Bezel Finish:
Chrome
Lettering Color:
White
Needle Color:
White
Gauge Face:
Black
MFG. Part #:
82472
Lighted:
Yes
Liquid Filled:
No
Garage Sale:
No
Overall Diameter:
2.29
Stud Length:
.80
Stud Diameter:
.19
Center to Center:
1.57
Depth:
2.25
Body Length:
1.38
Body Diameter:
2.07
Notes
Requires a 240 ohm sender.
Stewart Warner 82472 Wings Fuel Level Gauge, Black

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Bright chrome bezels, curved glass lenses, teardrop pointers and the distinctive "Wings" logo make these gauges right at home in any dash. Their rugged construction gives unsurpassed performance, readability and crisp, accurate response.

  • Classic 1940s retro styling 
  • 2-1/16" diameter
  • Requires 240 ohm sender 
  • 12-volt lamp
  • Choice of black or white face

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

flatheadv8s
Verified Purchaser
Brisbane , Australia

THE BEST

July 09, 2012
This is my third set and they are the classic gauge for a traditional hot rod. They have the look
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Stewart Warner 82471 Wings Fuel Level Gauge, White
(Part #66582471)
                        

Bright chrome bezels, curved glass lenses, teardrop pointers and the distinctive "Wings" logo make these gauges right at home in any dash. Their rugged construction gives unsurpassed performance, readability and crisp, accurate response.

  • Classic 1940s retro styling 
  • 2-1/16" diameter
  • Requires 240 ohm sender 
  • 12-volt lamp
  • Choice of black or white face
Fuel Gauge Interface Module
(Part #91012910)
                        Fuel level gauges are designed to work with  specific sending units that vary from one automobile or gauge  manufacturer to another. Some increase resistance from Empty to Full,  while others decrease as the level goes up. For a builder updating their  vehicle with new gauges, this presents a problem in that the  aftermarket gauges must match the sending unit located in the tank. This  module will allow you to use your stock sender with any fuel gauge. You  no longer have to remove the tank to add a separate sending unit or  modify the sending unit that comes with a aftermarket gauge set.
  • Simply wires in-line between your gauge and existing sender
  • Allows you to use your stock sender with any fuel gauge
  • No need to remove the tank to add a separate sending unit
 
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units
Stewart Warner 385C-F R Swing 6-12 Fuel Level Sending Unit, 240/33 Ohm
(Part #665385C)
                        What brand of gauge will you use?
This Stewart Warner brand fuel sender is compatible with all Stewart Warner and Classic Instruments fuel gauges.

How deep is your tank?
Measure the depth of your tank where the fuel sender arm will be located. Choose the sender with an operating range which includes that dimension.

Right or Left-swing arm?
Most fuel gauge senders attach with a 5-screw pattern. Two of these screws are farther apart than the other three. Position yourself such that the 2 wider-spaced holes are closest to your chest; a right side sender will have the arm (or "float") extending to your right, and a left side sender will have the arm extending to your left. This only matters when replacing an existing sender. A first-time installation can use either one, just drill the mounting holes accordingly.

LH/RH Swing Guide (Link)

OHM
The OEMs used several different resistance ranges for fuel level indication over the years. However, some of the aftermarket gauge manufacturers follow the common Stewart Warner values (240 ohm empty, 33 ohm full). The gauges and senders that we carry (385 & 391’s) use these standard Stewart Warner values.

Ohms Chart (Link)

Item Details

Requires a 1-7/16" hole in the tank for minimum/maximum of 1-5/8"
Stewart Warner 385B-F L Swing 6-12 Fuel Level Sending Unit 240/33 Ohm
(Part #665385B)
                        

Choosing a fuel level sender:

What brand of gauge will you use?
Speedway carries the excellent Stewart Warner brand of fuel senders. They are compatible with all Stewart Warner and Classic Instruments fuel gauges.

How deep is your tank?
Measure the depth of your tank where the fuel sender arm will be located. Choose the sender with an operating range which includes that dimension.

Right or left-swing arm?
Most fuel gauge senders attach with a 5-screw pattern. 2 of these screws are farther apart than the other 3. Position yourself such that the 2 wider-spaced holes are closest to your chest; a right side sender will have the arm (or "float") extending to your right, and a left side sender will have the arm extending to your left. This only matters when replacing an existing sender. A first-time installation can use either one, just drill the mounting holes accordingly.

LH/RH Swing Guide (Link) 

OHM
The OEM’s used several different resistance ranges for fuel level indication over the years. However, some of the aftermarket gauge manufacturers follow the common Stewart Warner values (240 ohm empty – 33 ohm full). The gauges and senders that we carry (385 & 391’s) use these standard Stewart Warner values.

Ohms Chart (GIF)

Stewart Warner 391A-F L Swing 10-15 Fuel Level Sending Unit-240/33 Ohm
(Part #665391A)
                        What brand of gauge will you use?
These Stewart Warner brand fuel senders are compatible with all Stewart Warner and Classic Instruments fuel gauges.

How deep is your tank?
Measure the depth of your tank where the fuel sender arm will be located. Choose the sender with an operating range which includes that dimension.

Right or Left-swing arm?
Most fuel gauge senders attach with a 5-screw pattern. Two of these screws are farther apart than the other three. Position yourself such that the 2 wider-spaced holes are closest to your chest; a right side sender will have the arm (or "float") extending to your right, and a left side sender will have the arm extending to your left. This only matters when replacing an existing sender. A first-time installation can use either one, just drill the mounting holes accordingly.

LH/RH Swing Guide (Link) 

OHM
The OEMs used several different resistance ranges for fuel level indication over the years. However, some of the aftermarket gauge manufacturers follow the common Stewart Warner values (240 ohm empty, 33 ohm full). The gauges and senders that we carry (385 & 391) use these standard Stewart Warner values.

Ohms Chart (Link)
Installation Instructions (PDF)