These Simpson individual arm restraints have padded arm bands and stainless steel hardware. 14" attachment straps. Available in red, blue or black.
These Y-Style arm restraints have padded arm bands and stainless steel hardware. Available in red, blue, black or purple.
Just the right size for quarter midgets.The simpson quarter midget cage net can be adjusted from 23" to 28" in length. It is 7-1/2" wide at widest point.Choose either black, blue, or red.
Just the right size for quarter midgets.
The simpson quarter midget cage net can be adjusted from 23" to 28" in length. It is 7-1/2" wide at widest point.
Choose either black, blue, or red.
Built specifically for Quarter Midget racers. Wrap around style (pull down) with latch & link buckle.
The Bell K1 Sport is a multi-use, full featured racing helmet with aero styling and Bell's innovative Dominator chin bar design. The K1's aerodynamic features enhance the helmet's stability in high-speed racing environments. The Snell SA2010 rated K1 Sport is a great race helmet for open wheel racers or kart racers who plan on moving into other forms of racing that require fire retardant helmets.The K1 Sport features a lightweight composite shell, comfortable interior fit and maximum ventilation with full chin bar, forehead and top vents. The K1 Sport Racing Helmet takes a 276 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment.The K1 Sport Helmet also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can customize the fit of the K1 Sport Helmet by using Bell's Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The race helmet is available in White and Rubberized Matte Black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The K1 Sport is pre-drilled for use with head and neck restraint devices. Bell Helmet Sizing Chart (PDF)Proper Fitting Guidelines (PDF)
The Bell K1 Sport is a multi-use, full featured racing helmet with aero styling and Bell's innovative Dominator chin bar design. The K1's aerodynamic features enhance the helmet's stability in high-speed racing environments. The Snell SA2010 rated K1 Sport is a great race helmet for open wheel racers or kart racers who plan on moving into other forms of racing that require fire retardant helmets.
The K1 Sport features a lightweight composite shell, comfortable interior fit and maximum ventilation with full chin bar, forehead and top vents. The K1 Sport Racing Helmet takes a 276 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment.
Bell Helmet Sizing Chart (PDF)
Proper Fitting Guidelines (PDF)
The GP2K racing helmet is certified to the Snell K2010 standard which requires the helmet to be tested to the Snell SA2010 standard test criteria but does not require the helmet to be fire retardant.The GP2K race helmet takes a 287 SRV Shield which features the SRV-1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The GP.2K also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the GP2K by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. In addition, replacement face piece kits are available for the GP2K in the event the front interior chin piece needs to be replaced. Available in White.Bell Helmet Sizing Chart (PDF)Proper Fitting Guidelines (PDF)
The GP2K racing helmet is certified to the Snell K2010 standard which requires the helmet to be tested to the Snell SA2010 standard test criteria but does not require the helmet to be fire retardant.The GP2K race helmet takes a 287 SRV Shield which features the SRV-1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The GP.2K also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the GP2K by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. In addition, replacement face piece kits are available for the GP2K in the event the front interior chin piece needs to be replaced. Available in White.
The GP2 CMR is certified to the Snell/FIA CMH standard (CMR) developed specifically for younger racers participating in karting.The GP2 CMR takes a 287 SRV 2MM Shield which features the SRV1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The helmet is available in White, Blue Kinetic, or Hero Kinetic.
The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track, the Vador is certified to the Snell SA10 standard.The Vador features a lightweight composit shell, comfortable interior fit and rear facing vents to prevent dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the left side to allow shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Comes with a clear shield and visor strip.The Vador features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and installation. Racers can also customize the fit by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. The helmet is available in a rubberized surface that is more resistant to finger prints and smudges.The Vador is set up for use with Head and Neck Restraint devices and features Bell's M6 terminal hardware that is incorporated into the helmet. It accepts anchor system hardware. (Consult with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.)Size Chart
The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track, the Vador is certified to the Snell SA10 standard.
The Vador features a lightweight composit shell, comfortable interior fit and rear facing vents to prevent dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the left side to allow shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Comes with a clear shield and visor strip.
The Vador features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and installation. Racers can also customize the fit by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. The helmet is available in a rubberized surface that is more resistant to finger prints and smudges.
The Vador is set up for use with Head and Neck Restraint devices and features Bell's M6 terminal hardware that is incorporated into the helmet. It accepts anchor system hardware. (Consult with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.)
Size Chart
The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind. Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones. Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.
Impact NecksGen now comes in 3 sizes. Large unit fits most adults, typically a driver 100 lbs or more. Medium unit is for smaller torso drivers 1" narrower but still accepts 2" or 3" seat belts. Youth unit, also fits small torso drivers, typically youth drivers between 7 and 16 years old. Youth size accommodates only a 2" seat belt.
Sizing Specifications
Impact NecksGen FAQ's and Features (PDF)
The GP.2 Youth helmet is designed for young racers who need an extra small size helmet that is fire retardant. The GP.2 Youth has the same design features as the adult GP.2 model. The GP.2 Youth is SFI 24.1 certified – the SFI 24.1 standard is accepted by various youth racing and karting organizations including the Quarter Midget Association of America (QMA). Metallic SilverFormula Style HelmetAdvanced Aerodynamic StylingAir Intake To Maximize Forehead VentilationDirect Flow Chin Bar Ventilation Youth Size ShellLightweight Composite Shell TechnologyStandard EyeportPositive Seal Visor System287/3MM SRV Shield (SRV-1 Pivot System)E-Max Plus Multi Density LinerPro Style Comfort-Plus InteriorRemovable/Replaceable Cheek PadsSFI 24.1 Youth CertificationAvailable in sizes 4XS to XSHelmet Sizing Chart
The GP.2 Youth helmet is designed for young racers who need an extra small size helmet that is fire retardant. The GP.2 Youth has the same design features as the adult GP.2 model. The GP.2 Youth is SFI 24.1 certified – the SFI 24.1 standard is accepted by various youth racing and karting organizations including the Quarter Midget Association of America (QMA). Metallic Silver